494815

Meliconi SPEEDY 2 COMBO Manual

3
Zoom out
Zoom in
Previous page
1/4
Next page
19
Remember to always make a note of the 4-digit codes for your appliances on the inside of the battery cover
when the code search and saving are finished. The codes will be required if the remote control needs to be
re-programmed following accidental deletion.
To find the code for your remote control:
1. Simultaneously press and hold for 5 seconds the buttons corresponding to the appliance for which you
would like to enter the code:
and for the analogue TV, and for the decoder, or and
for the digital TV, until the indicator light starts to flash indicating that the remote control is in the
programming state.
2. Upon release insert the code number you noted beforehand. Three flashes indicate that the code has been
memorized correctly. If not, try the code entry procedure again starting from point 1.
PROGRAMMED CODE NOTING
RE-PROGRAMMING YOUR REMOTE CONTROL BY ENTERING THE CODE NOTED DOWN
1. Simultaneously hold down the and buttons for 5 seconds (if you want to know the codes for the
analogue or digital TV), or
and (if you want to know the code for the decoder), until the indicator
light starts to flash indicating that the remote control is in the programming state.
2. Release the buttons and press and release the
button within 8 seconds.
3. After a short pause, the indicator light produces four series of flashes with a space between them,
corresponding to the code you are looking for. Count the number of flashes; each series of flashes
corresponds to one figure in the code. 10 flashes correspond to 0. For example, the code 1306 corresponds
to:
= 1
= 3
= 0
= 6
4. Make a note of the code on the adhesive label inside the battery cover for quick and easy consultation.
Identify and take note of the code which you have discovered
following the code noting procedure
(see “PROGRAMMED CODE NOTING” section).
NOTE: The indicator light flashes more quickly during the search operation.
The indicator light stops flashing and the remote control exits the programming mode in the following
cases:
• if no buttons are pressed for 12 seconds
• if the end of the code search list has been reached. In this case, consult the website
www.meliconi.com.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meliconi SPEEDY 2 COMBO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meliconi SPEEDY 2 COMBO in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info