494812

Meliconi Gumbody universal 5 web Manual

3
Zoom out
Zoom in
Previous page
1/7
Next page
10
SETTING CODES USING A MANUAL SEARCH
(only to be performed if the specifi c code could not be found)
CHECK
Check that the other buttons correspond to the functions of the original remote control; if not, it is likely
that the code found is incorrect, but is used for a very similar device. In that case, repeat the procedure
from point 2.
If the manual search for the code is successful, obtain the code in use by following the DISPLAY CODE IN
USE procedure and make a note of it inside the battery cover.
NOTE: During the search the indicator stops fl ashing and the remote control exits the programming mode
in the following cases:
• if for 12 seconds the button indicated is not pressed or if another button is pressed
• if the list of codes to fi nd is terminated. If this happens, go to the www.meliconi.com website
1. Switch on the device to be programmed:
- if it is a TV, SAT or TER select a programme
- if it is a DVD insert a DVD.
- if it is a VCR insert a cassette.
2. Press and hold down for 6 seconds the device selection
button corresponding to the device you wish to enter
the code for. Note: Use the PVR button if the device is a
VCR.
3. Release the button. The indicator light will fl ash. Point
the remote control at the device and press the ON/OFF
key (or PLAY if it is a VCR/DVD). If the device does NOT
switch off (or if the VCR/DVD does not start playing)
press the same button again slowly (it may be necssary
to press the button several times).
4. When the device responds correctly, press OK. Three
long fl ashes indicate that the operation has been carried
out correctly.
6 SEC.
or or or or
or
ENTERING THE CODE DIRECTLY
(only to be performed if you know the specifi c code to be set)
1. Press and hold down for 6 seconds the device selection
button corresponding to the device you wish to enter
the code for. Note: Use the PVR button if the device is a
VCR.
2. Release the button. The indicator light fl ashes.
Immediately enter the specifi c code previously found.
(e.g.. 1306).
3. Three long fl ashes indicate a correct setting.
If they do not appear, repeat the procedure. If this still does not work it means the code indicated
is not in the remote control, so it must be loaded using the INTERNET as described in the following
section.
6 SEC.
or or or or
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meliconi Gumbody universal 5 web at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meliconi Gumbody universal 5 web in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info