122720

Meliconi gumbody universal 5 smart Manual

4
Zoom out
Zoom in
Previous page
1/7
Next page
11
UPDATING VIA AUDIO CABLE
DISPLAY CODE IN USE
To use this function, the remote control you wish to copy the function from must be working
learn the missing functions from an original remote control and save them on the F1 - F2 - F3 -
F4 buttons or on a normal remote control, thereby replacing the command that was on the button
previously.
learn all the functions from a new remote control not included in the universal remote control databank
because it was released on the market afterwards.
Using this function you can:
LEARN FUNCTION
Connect the remote control using the audio cable in the kit
supplied to a PC with an internet connection. Connect the
cable as follows:
1. Open the remote control battery compartment.
2. Connect the fl at end of the cable (A) to the connector at
the three points J1 under the battery housing (B), taking
care not to press too hard (C).
3. Connect the jack at the other end of the cable (D) to the
PC audio output (or headphones output).
4. Follow the instructions in the on-line guide at www.
meliconi.com/guide.
If you set up the remote control using the MANUAL
SEARCH procedure, obtain and make a note of the code
in use as follows:
1. Press and hold down for 6 seconds the device selection
button corresponding to the device you wish to enter
the code for. Note: Use the PVR button if the device is a
VCR.
2. Release the button. The indicator light will fl ash. Press
the TV / radio button for an instant.
3. After a pause of several seconds, the indicator light
produces four sets of fl ashes, spaced out, corresponding
to the code to be obtained. Count the number of fl ashes.
Each set of fl ashes corresponds to one fi gure in the code.
Ten fl ashes correspond to the fi gure 0.
4. Make a note of the code obtained on the label on the
inside of the battery cover. You may need it in future.
Code obtained = 1306
A
B
C
D
6 SEC.
or or or or
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meliconi gumbody universal 5 smart at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meliconi gumbody universal 5 smart in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info