494817

Meliconi Gumbody UNIVERSAL 3-300 Manual

4
Zoom out
Zoom in
Previous page
1/5
Next page
1. Hold down the selection key for the appliance to be
programmed for 5 seconds.
2. When released, the selected key will start to flash, enter
the code (
e.g. TV 1100
). Three flashes indicate that the
operation has been completed correctly.
CURRENT CODE DISPLAY
N.B. this operation cannot be interrupted and the remote control cannot
therefore be used until the end of the 4 series of flashes.
1. Hold down the selection key of the appliance whose code
you want to know for 5 seconds.
2.
When the key is released it will start to flash; press and
release the 1-/-- key within 8 seconds
.
3. After a few seconds, the light indicator communicates
the code you are looking for by flashing the four numbers
separately. Count the number of flashes; each series of
flashes corresponds to one figure in the code. 10 flashes
correspond to 0.
4. Make a note of the code on the adhesive label inside
the battery cover for quick and easy future reprogram-
ming.
To find out the code of your remote control, follow this procedure:
Although not indicated on the keypad,
some keys can be used for additional commands.
Find them on your
UNIVERSAL 3-300
remote control by pressing the keys one by one and discovering the
commands that interest you.
In particular, the additional functions most frequently used, such as NORMALIZATION, COLOUR and
BRIGHTNESS, can be found on the following keys:
TV FUNCTIONS ALWAYS ACTIVE
HOW TO USE THE ADDITIONAL COMMANDS WHICH DO NOT APPEAR ON THE KEYPAD
For the functions used less frequently, look for the additional commands on the enclosed CD or the site
www.meliconi.com/guide. As well as easily finding the code to programme your remote control, consult
the on-line guide to help you to find which keys on the
UNIVERSAL 3-300
remote control correspond
to the additional commands.
You can memorize the additional commands on the function keys
F1 - F2 - F3 - F4
.
Normalization:
Brightness (+): or
Brightness (-): or
Colour (+): or
Colour (-): or
4
5 SEC.
or
If you know the exact code with which to programme the remote control, enter it as follows:
ENTERING THE CODE
+++
11
...................................................... = 1
.......................................... = 3
= 0
....................... = 6
Code obtained = 1306
The functions
Mute
,
Vol -
,
Vol +
and
AV
are memorized on the keys
F1
,
F2
,
F3
,
F4
. These functions
can be used to control appliances other than the TV. For further information consult the enclosed CD or
the on-line guide on the site www.meliconi.com/guide.
or
5 SEC.
or
or
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meliconi Gumbody UNIVERSAL 3-300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meliconi Gumbody UNIVERSAL 3-300 in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info