673549
20
Zoom out
Zoom in
Previous page
1/32
Next page
INSTRUCTIONS MANUAL
20
3.10 ELECTRONIC PROGRAMMER
SETTING UP THE ACTUAL HOUR:
Once the electrical connection is made to the oven, the display blinks and
shows 0.00.
Press keys (1) and (2) at the same time, then press keys (-) and (+) to set up
the actual hour within 4 seconds; the oven remains in manual operation and
no programming is necessary.
GENERAL REMARKS:
- Between 10.00 p.m and 6.00 a.m. the display intensity dims automatically.
- If not deactivated as per the following instructions, the acoustic signal is cut off after 2 minutes.
- Any programming described hereunder is activated after approx. 4 seconds from its setting up.
- 23 hours and 59 minutes is the maximum time allowed for programming the oven.
- If the supply voltage fails, all the programmed settings are erased. When the supply voltage returns, the display
blinks and shows 0.00. Set up the actual hour and the programme again to reset the equipment operation.
SAFETY LOCK FOR CHILDREN
The programmer is provided with a safety lock which stops the cooking programming and consequently the oven
operation;
Lock running:
- press both switches (1) (2) at same time for about 8 seconds
- the display shows "ON"; release the switches
- press switch (+); the display shows "OF" and the symbol "..key.."
Now the safety lock starts running and after about 5 seconds the display shows the current time and the symbol
"..key.."
Lock deactivation:
- press both switches (1) (2) at same time for about 8 seconds
- the display shows "OF"; release the switches
- press switch (+); the display shows "ON"
Now the safety lock is deactivated and after about 5 seconds the display shows the current time.
Automatic Operation
The oven can be programmed to switch on and of f automatically.
To do this proceed as follows:
1. Select the required cooking function and temperature using the function selector and the thermostat dial.
2. Press key (2) and set the cooking time by pressing keys (-) and (+) within the next 4 seconds
3. Press key (3) and set the end of the cooking time in the same way.
The actual time reappears and pilot light (AUTO) remains ON, when the cooking process starts, pilot light (A) will
remain on. The cooking time left can be controlled by pressing key (2), or the time can be changed by repeating
the same procedure.
Reset the cooking time to 0.00 to erase the preset programme, and when the actual time reappears, press key (4)
to reset the manual function. Once the cooking process is over the acoustic signal goes off and the oven is
automatically switched of f. Press one of the keys from (1) to (4) to return the programmer to the manual function.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meireles G 3640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meireles G 3640 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info