673545
11
Zoom out
Zoom in
Previous page
1/32
Next page
4 - Grill
4.1 - Open the oven door and remove all internal accessories.
4.2 - Remove the burner / reflector unit by
loosing the screw fixing the reflector and
remove all elements from the injector support
by turning downwards
4.3 - Unscrew and remove the injectors and replace them those corresponding to the available gas see table 1
4.4 - Screw the burner / reflector and put in place the internal accessories.
5 - Regulating the primary air - only the oven burner and / or grill
5.1 - move the air regulator which is input to the burner near the inyector to increase or decrease the air passage.
6 - Low flow adjustment:
6.1 - Light the burner on and put the knob to the Low Position.
6.2 - In this position, remove the knob of the tap.
6.3 - With screw - driver perform on the taps
screw until the flame is conveniently regulated
to the low position and stable
6.4 - Reassemble the knob and pass quickly from the Full On Position to the Low Position, several times, to ensure
that the flame remains stable.
7 - After connecting the unit, check for gas leaks with soap and water solution. NEVER USE A FLAME.
8 - Place, near the inlet gas connection, a label indicating the type of gas for which the appliance is now prepared.
"Appliance prepared for..."
INSTRUCTIONS MANUAL
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meireles G 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meireles G 100 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info