673519
20
Zoom out
Zoom in
Previous page
1/29
Next page
9880022302-EN-250717.doc
20
EN
N
Model door with profiles (Remove the oven door) For this door model, together with
the external glass, you can also extract the intermediate glass (if present).
Remove the oven door, unscrew the 4 fixing screws of the steel plate C (fig. 5) which
lock the glass surfaces into place. The glass surfaces can now be removed by slipping
them out.
fig. 5
fig. 6 fig. 7
Carry out the same steps in reverse order to refit the glass surfaces. Take the utmost care
to ensure they are in the right order and are placed the right way round (the clear glass
must be towards the inside and the position of the lettering on the glass surfaces must be
as in (fig. 6). Also make sure the protective gaskets are positioned correctly. Some
models have a glass fastening clip that must be repositioned correctly (fig. 7),
keeping the clip D against the strip painted on the top of the door, and inserting
the intermediate glass E and internal glass F into position (as shown in the figure).
Before refitting the door, make sure the glass is securely in place.
ATTENTION! THE REMOVAL AND INSTALLATION MUST BE CARRIED
OUT ACCURATELY AND WITH THE UTMOST CARE IN ORDER TO AVOID
BREAKING THE GLASS
Attention! Do not remove the hinge locking hooks from their seat when the door is
not mounted in the oven. Do not close the hinges without the weight of the door
as it causes violent closure of the springs.
Do not place weights on the door and do not seize it by the handle as this may
damage the product and cause malfunctions.
Moreover, do not use the oven until the oven door has been re-fitted correctly.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meireles FI-60MTO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meireles FI-60MTO in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info