633389
12
Zoom out
Zoom in
Previous page
1/29
Next page
Page 12 of 12
Setup
The setup position allows the Velocity Factor, Impedance, Pulse Width, Gain, Distance Units, Sound and Display Contrast to be
set. These are remembered when the instrument is switched off and recalled when switched back on.
To adjust any of these parameters turn the rotary switch to the setup position. The parameter to be adjusted is highlighted at the
top of the screen. Pressing the left or right key will select a different parameter; using the four-way joy switch will change the
parameter.
Velocity Factor The velocity factor is a characteristic of the cable under test and needs to
be set correctly for the distance to be accurate. Refer to the section in this
user guide for further information.
Impedance¹ The impedance is a characteristic of the cable under test and needs to be
set correctly for the best display. Refer to the section in this user guide
for further information.
Pulse Width¹ The pulse width may be adjusted for a clearer display.
Gain¹ The gain may be adjusted for a clearer display
Distance units The distance may be shown in metres or feet.
Contrast control The display contrast may be adjusted.
Sound The instrument’s sounder can be muted.
1
While in Auto the unit will select the optimal impedance, pulse width and gain for the current range, overriding any manually set
values. Whilst in Cursor 1 or Cursor 2 the unit will select a pulse width and gain for the current range, yet the user may override
the selection.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megger TDR1000-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megger TDR1000-3 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Megger TDR1000-3

Megger TDR1000-3 User Manual - German - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info