551367
5
Zoom out
Zoom in
Previous page
1/6
Next page
STEP 2. Drill Holes
1)Place the roof gasket(#5) in the chosen location and mark 1 center hole and 4 screw holes on the roof.See Figure2
2)Remove the roof gasket(#5) and drill the aboved-mentioned 5 holes accordingly on the roof
4 holes for screws
Hole for
coaxical cable
STEP 4. Fix the Antenna
1)Place the water-proof washer(#4) correspond to the 4 screw holes.
2)Run antenna cable through the center hole of the roof. See Figure8
3)Put 4 carriage bolts(#7) through the mount and washer(#4) and roof.See Figure9
4)Go inside the vehicle / yacht. Pull the antenna cable through the roof gasket(#5) and fix the 4 carriage bolts (#7) with screw sets(#6)
accordingly inside the roof. See Figure10
Figure 2
Figure 5
Figure 3 Figure 4
Figure 6 Figure 7
Figure 8 Figure 9
Figure 10
STEP 3. Install the Antenna
1)Gently pull the antenna cable through the mount.See Figure 5
2)Slide the antenna onto the mount. See Figure 6.Then slide the hexagon Nuts in the opposite direction to lock it tighter. See Figure 7
STEP 2. Drill Holes
1)Place the roof gasket(#5) in the chosen location and mark 1 center hole and 4 screw holes on the roof.See Figure2
2)Remove the roof gasket(#5) and drill the aboved-mentioned 5 holes accordingly on the roof
4 holes for screws
Hole for
coaxical cable
STEP 4. Fix the Antenna
1)Place the water-proof washer(#4) correspond to the 4 screw holes.
2)Run antenna cable through the center hole of the roof. See Figure8
3)Put 4 carriage bolts(#7) through the mount and washer(#4) and roof.See Figure9
4)Go inside the vehicle / yacht. Pull the antenna cable through the roof gasket(#5) and fix the 4 carriage bolts (#7) with screw sets(#6)
accordingly inside the roof. See Figure10
Figure 2
Figure 5
Figure 3 Figure 4
Figure 6 Figure 7
Figure 8 Figure 9
Figure 10
STEP 3. Install the Antenna
1)Gently pull the antenna cable through the mount.See Figure 5
2)Slide the antenna onto the mount. See Figure 6.Then slide the hexagon Nuts in the opposite direction to lock it tighter. See Figure 7
STEP 2. Drill Holes
1)Place the roof gasket(#5) in the chosen location and mark 1 center hole and 4 screw holes on the roof.See Figure2
2)Remove the roof gasket(#5) and drill the aboved-mentioned 5 holes accordingly on the roof
4 holes for screws
Hole for
coaxical cable
STEP 4. Fix the Antenna
1)Place the water-proof washer(#4) correspond to the 4 screw holes.
2)Run antenna cable through the center hole of the roof. See Figure8
3)Put 4 carriage bolts(#7) through the mount and washer(#4) and roof.See Figure9
4)Go inside the vehicle / yacht. Pull the antenna cable through the roof gasket(#5) and fix the 4 carriage bolts (#7) with screw sets(#6)
accordingly inside the roof. See Figure10
Figure 2
Figure 5
Figure 3 Figure 4
Figure 6 Figure 7
Figure 8 Figure 9
Figure 10
STEP 3. Install the Antenna
1)Gently pull the antenna cable through the mount.See Figure 5
2)Slide the antenna onto the mount. See Figure 6.Then slide the hexagon Nuts in the opposite direction to lock it tighter. See Figure 7
STEP 2. Drill Holes
1)Place the roof gasket(#5) in the chosen location and mark 1 center hole and 4 screw holes on the roof.See Figure2
2)Remove the roof gasket(#5) and drill the aboved-mentioned 5 holes accordingly on the roof
4 holes for screws
Hole for
coaxical cable
STEP 4. Fix the Antenna
1)Place the water-proof washer(#4) correspond to the 4 screw holes.
2)Run antenna cable through the center hole of the roof. See Figure8
3)Put 4 carriage bolts(#7) through the mount and washer(#4) and roof.See Figure9
4)Go inside the vehicle / yacht. Pull the antenna cable through the roof gasket(#5) and fix the 4 carriage bolts (#7) with screw sets(#6)
accordingly inside the roof. See Figure10
Figure 2
Figure 5
Figure 3 Figure 4
Figure 6 Figure 7
Figure 8 Figure 9
Figure 10
STEP 3. Install the Antenna
1)Gently pull the antenna cable through the mount.See Figure 5
2)Slide the antenna onto the mount. See Figure 6.Then slide the hexagon Nuts in the opposite direction to lock it tighter. See Figure 7
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat T2 - DVB-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat T2 - DVB-T in the language / languages: English, German as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info