551352
12
Zoom out
Zoom in
Previous page
1/19
Next page
System Components
Antenna unit
The elegant plastic housing will protecting the antenna
against outside weather conditions. Under the housing there
is a 45 cm high-performance antenna. The new technology
of 0-90 ° elevation enables optimal reception across Europe.
Control unit (IDU)
The control unit is used for satellite selection and control. It
is connected between the antenna and the set-top box and
supplied the antenna with electricity.
Open box and remove the control unit, cables and packing material. Lift the antenna
straight up out of the box. Never place the system upside down!
ENGLISH ENGLISH
04
05
Warning:
The Campingman Twin/AutoSkew has an additional Auto Skew function that
adjust the polarization angle of the LNB automatically, and a additional con-
nection for a second set-top box. The control unit must be operated only on
the selected antenna port. Only this is provided for controlling.
Installation
Warning:
Please also note that the antenna height of the vehicle will change accordin-
gly! Please strictly adhere to the various points in the installation instructions!
Basically, we recommend that you leave the installation to make by your dealer or work-
shop!
General information:
Provide a suitable working environment, a garage/warehouse is better than open air. The
ambient temperature for installation is between +5° C and max. +25° C. Work not directly
in the sun. Comply with the safety regulations when handling with chemical products.
Provide the necessary hygiene.
Preparation:
1. Make sure that the roof of your vehicle is sufficiently stable. In case of insufficient or
doubtful roof stability is an approximately 2 mm thick plate with 100 x 100 cm is to be
attached to the outer roof skin. Ask to your vehicle manufacturer.
2. Make sure that all parts are present. You may also need a roof penetration for the con-
necting cable of the antenna. This you get in specialist shops.
3. Place the antenna on the installation area and align it so that the antenna connection
is not facing forward. Make sure that the mounting location is flat and do not interfere
with roof constructions that can interfere with satellite reception. Constructions up to
8 cm in height do not matter, higher constructions should have a respective distance
from the antenna, so that no barrier exists between the antenna and the satellite. The
least distance to an air conditioner should be 30 cm.
4. Clean the mounting surface with a suitable cleaner and a fleece cloth to remove dirt
and impurities. Then draw the antenna feet with a pen.
Warning: transport lock
Then remove with the „LOCK“
marked screw on the bottom
of the antenna.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat Shipman GPS-AutoSkew at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat Shipman GPS-AutoSkew in the language / languages: English, German as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info