551350
16
Zoom out
Zoom in
Previous page
1/19
Next page
ENGLISH ENGLISH
12
13
Set values for European capitals Troubleshooting
There are a number of common issues that can affect the signal reception quality or the operation of the Sat-
master Portable. The following sections address these issues and potentialsolutions.
Blown fuse, Low power, or wiring
If the antenna unit is installed but entirely non-responsive, there are three key factors to check as part of the
troubleshooting Process:
1. Blown fuse
With the system powered on, move the antenna reflector slowly by hand. If the reflector does not move freely,
a fuse is not the Problem. If the reflector does move freely, one of the two fuses mounted on the CPU Board
may have blown or been broken. The Satmaster Portable Technical Manual Provides detailed instructions for
authorized service personnel who may be required to replace a fuse. Contact your local Megasat dealer or
service center for assistance.
2. Low power
If the power cable to the antenna unit is more than 50ft (15 m), the power levels can decrease over the course
of the cable, resulting in a voltage or current level at the antenna unit that is too low to power the system Pro-
perly. The Satmaster Portable Technical Manual Provides detailed instructions for supplying adequate power to
the antenna unit. Contact your local Megasat dealer or service center for assistance.
3. Cable connection
Also, an incorrect cable connection may be the reason that the system is not functioning properly. Check all
cables and connections. Trained service personnel can assist you. Contact your Megasat dealer.
4. Satellite signal blocked
Satellite signals can be blocked or degraded by buildings, other vessels, or equipment on the vessel itself.
Simply moving the vessel or obstruction will clear the signal.
5. Satellite coverage issue
Satmaster Portable will Provide outstanding reception within the 18” (46 cm) antenna coverage area for your
satellite television service of choice. However, reception can be degraded as you apProach the fringe coverage
areas. Refer to your satellite television service manual to check the viable coverage area for a18” (46 cm) an-
tenna.
6. Radar interference
The energy levels radiated by radar units can overload the antennas front-end circuits. Check with your installer
to make certain that the Satmaster Portable antenna unit is in the optimal location with regard to your radar
unit.
7. Satellite Frequency Data changed
If some channels work while one or more other channels do not, or if the antenna is unable to find the satellite,
the selected satellite’s frequency data may have changed. This frequency data can be updated via the mainte-
nance port. Contact your local Megasat dealer or service center for assistance.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat Satmaster Portable Exclusive at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat Satmaster Portable Exclusive in the language / languages: English, German as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info