551361
22
Zoom out
Zoom in
Previous page
1/33
Next page
Basic Operation Basic Operation
ENGLISH ENGLISH
10
11
Power on/o
1. Connect to the power supply with the adaptor.
2. To turn on the TV -> Press POWER button on the TV or remote control.
To turn off the TV -> Press POWER button on the TV or remote control.
1. Picture menu
Basic OSD Menu operation
Press MENU button to display the OSD menu as below:
Input Source select
Press INPUT button on the TV set or remote control to display the input
source menu, and use CH+/- button on the TV set or up/down button
on remote control to select the input source, press OK button on the
remote control to enter.
Note: Before you select the input source, make sure the connections are
prepared.
Picture Mode: Select your desired picture mode from Dynamic, Standard,
Mild and User.
Brightness: Adjust image black level.
Contrast: Adjust image contrast.
Sharpness: Adjust the sharpness(Gray and invalid in VGA/PC mode).
Colour: Adjust image colour from black and white.
Tint: Control the tint (NTSC mode only).
Colour Temp.: Select an optimum color temperature mode to suit your eyes
for viewing from Warm, Cool, Standard.
Aspect Ratio: Change the aspect for the screen from 4:3,16:9, Zoom 1, Zoom 2
or Panorama etc...
Noise Reduction: If the broadcast signal received is weak, you can select the
Noise Reduction option to reduce the video noise level between Off,
Low, Middle and High.
Use
p  / q button to select the main menu, and press u / OK button to enter the subme-
nu. In the submenu, use p  / q button to select the function item, press u / OK button
to enter the setup menu, then press t  / u button to adjust, or press p  / q to select and
press OK / t  / u button to confirm.
* Press MENU / t button to return to the upper menu.
* Press EXIT button to exit the menu display.
Note1: Only when you input the suitable signal, the relevant items can be activated
Note2: Please operating the OSD menu according to hint on the bottom of the banner.
Main menu: Picture | Sound | Channel | Feature | Setup
Submenu
(Picture menu
for example)
You should
operate the OSD
menu according
to the hint.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat Royal Line 24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat Royal Line 24 in the language / languages: English, German as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info