479164
16
Zoom out
Zoom in
Previous page
1/21
Next page
ENGLISH ENGLISH
10
11
LCD Display
Startup
Select the appropriate version for your column and follow the instructions. The LCD display shows the current status of the automated search system.
(applies to Satmaster Portable Premium and Professional)
Elevation und Azimuth
use the „high“ - and „down“ - the keys to adjust the azi-
muth or elevation angle.
Elevation angles are set from 20 degree to 70 degrees. Fac-
tory setting will be 50 degrees. After the first settings have
been activated they will be automatically memorized. There
is no need to reset as long as you remain in the same loca-
tion.
Satmaster Portable Classic
Turn on the TV and Settop box.
Setting the set-top box options to watching TV. (Refer to Subscribers Manual of your settop box.)
Turn on the power inserter
Select the desired satellite using the „up“ - and „down“ buttons.
Then press the „Set“ button to accept the setting.
A few seconds later the „elevation angle menu“ on the LCD.
Choose an appropriate elevation with the „up“ - and „down“ buttons.
Then press the „Set“ button to accept the setting.
Wait until your antenna has finished scanning and positioning
(about one minute).
After commissioning, you must turn off the power supply so that you can
receive all TV programs easily. (Do not remove the input cable between
antenna and receiver.)
Example Screen (Satellite Selection)
Example (Parking position)
Example Screen (Elevation Selection)
After positioning is completed the TV reception is automatically started and you receive a TV signal. If you get no TV,
check all connections and settings (Receiver, Portable and Satmaster TV) and follow the above steps again.
If you want to stop using the Portable Satmaster or bring the antenna for transport into the park position, connect the
power supply (if you removed it) and turn from the IDU or the Einspeisebox and again. The antenna is automatically
returned to the park position. The elevation drops and rotates the base unit to the antenna off in the park position. This
process takes about one minute.
Wait 10 seconds to start the automatic search with the last setting.
To change the setting or manual search, press any key.
Did you press a button, the satellite name appears on the LCD. If not, the
antenna is now investigating the pre-satellite and you can skip the next
6 steps.
Did you press a button, the scan
starts now. Otherwise, wait 10 se-
conds before the scan starts auto-
matically. Wait until the antenna
and the positioning of your search
has ended. (about one minute).
Turn on the IDU
Satmaster Portable Premium Satmaster Portable Professional
ASTRA1
19.2E
H POL,
SELECTED
SIGNAL
DETECTED
V POL,
SELECTED
NIT
DETECTED
SIGNAL
LOST.
CHECK
STB CBL.
EL 30DEG
18V from set-top-box
13V from set-top-box
Not connected to receiver. Check the
supply cable to the STB-1 connection.
Can not nd a satellite signal.
Check the orientation of the antenna.
Conrmed that the signal from the
target satellite is correct
Satellite signal is found
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat Portable Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat Portable Classic in the language / languages: English, German as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info