551328
13
Zoom out
Zoom in
Previous page
1/23
Next page
12
22KHz
Hier können Sie die Standardeinstellung der 22KHz Schaltung ändern. Als Standard ist
die Option „Auto“ gewählt.
DiSEqC Type DiSEqC1.0 oder 1.1
Betreiben Sie den Receiver an einem DiSEqC Schalter oder an einem Multischalter mit
DiSEqC müssen Sie die DiSEqC Einstellung anpassen. Für den Standardbetrieb mit
einem Satelliten ist keine Einstellung notwendig.
USALS
Haben Sie eine Anlage mit Motorsteuerung, können
Sie hier die nötigen Einstellungen vornehmen.
Wählen Sie die gewünschte Steuerung USALS/
DiSEqC 1.2 und legen die gewünschten Positionen
fest.
Bevor Sie USALS verwenden, sollten Sie
im Hauptmenü Ihre Länder und Standort Position
festlegen!
Suche starten
Drücken Sie die OK Taste auf der Option Suchlauf
Starten um die Programmsuche zu starten. Um
Optionen des Suchmoduses zu ändern, wählen Sie
unter Sucjhmodus den gewünschten aus. Ein
Fenster mit der Auswahl „Programme
löschen“ erscheint. Wählen Sie nein wenn alle
Sender angehängt werden sollen oder Ja wenn die
vorhandenen Sender überschrieben werden sollen.
Werkseinstellung
Wenn Sie die Option Werkseinstellung wählen, werden alle Werkseinstellungen wieder
hergestellt. Wählen Sie die gewünschte Option „Alle, nur TV Sender, nur
Radiosender,……“ aus. Entsprechend der Auswahl werden die Einstellungen
wiederhergestellt. Eine Warnung erscheint. Wählen Sie „Ja“ um alle Einstellungen
zurückzusetzen oder „Nein“ um den Vorgang abzubrechen.
33
4.2 EDIT CHANNEL
In this menu you can set program edit like
delete, lock, rename, move and swap the
selected channel, set FAV and so on.
TV Channels
Here you can Select Channel, Delete Channel,
Skip Channel, Move Channel, Lock Channel. Select TV Channels, you will get this
window.
Move
Press OK to select the channel you want to
move, and move to the position you like, or just
input the numeric key, the channel you selected
will move to that position
Delete
Here you can delete the channel you choose,
and press OK to select and press again OK to confirm delete
Lock
Here you can lock one channel, press OK to input password, and you can have a channel
with locking.
Rename
Select channel that you want rename from channel list, press F1 button, then using the
UP/ DOWN /LEFT /RIGHT keys to select characters which you want to edit. Press OK to
confirm your selection. In this menu, you can set the word with the extend. Caps on or off.
Swap
You can select the channel that you want to swap from the channel list, press F2 button,
you will be asked to swap the channel to put where, input the destination number and
press OK. Then you can swap one channels from one position to another.
NOTE: Radio Channels operation similar to the above
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat HD900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat HD900 in the language / languages: English, German as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info