479200
35
Zoom out
Zoom in
Previous page
1/44
Next page
13
EN
Blind Scan
First scan the band to get the transponders which can be locked. After gathering all Transponders, Scan
the transponders one by one to get the programs.
5.3.2 Transponder
Press GOTO to switch the list to show transponders of the focused satellite. Also you can press GOTO to
switch back to satellites' list.
Add transponder:
Press RED to add a new transponder. It can't save an existing TP under the same satellite.
Edit transponder:
Press GREEN to edit the focused transponder. It can't save an existing TP under the same satellite.
Delete transponder: Press YELLOW to delete the focused transponder. Press OK to confirm.
Single Transponder Scan:
Press BLUE to pop the menu of scanning setting. After configuring the settings, Press OK to start
scanning.
Multi-Transponder Scan:
Press OK to select transponders with the mark"9",then press BLUE to pop the menu of scanning setting.
After Configuring the settings, press OK to start multi-transponder scanning.
5.4 Time Setting
To access the Menu, press MENU then select [Time]. The Menu
provides options to adjust the time settings. Press / to select
an option and press / to adjust the settings. Press EXIT to exit
the menu.
(1)Time Auto: Update time with the stream time, or NOT.
(2)Time Zone: Select the Time Zone Offset.
(3)Date: Show and set the system date.
(4)Time: Show and set the system time.
5.3.3Unicable
Unicable enables the delivery of broadcast programming to multiple users over a single
coaxial cable. It should work with Unicable LNB or SaTCR equipment.
Set the Unicable ON, and select a channel which isn't occupied by other users.
Dish setup with Unicable
When unicable activated, the DiSEqC1.0, DiSEqC1.1, DiSEqC1.2,DiSEqC1.3 are disabled.
Set Pos A/B for satellites if the equipment can support.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat HD510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat HD510 in the language / languages: German as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info