551329
12
Zoom out
Zoom in
Previous page
1/24
Next page
12
Installation
UniCable Systeme:
Unter dem Menüpunkt LNB Frequenz, können Sie die Einstellungen für
Einkabelsysteme (UniCable) vornehmen. Mit den Tasten können Sie
verschiedene Einstellungen für das LNB wählen. Der Receiver ist für
unterschiedliche UniCable Systeme programmierbar. Je nach System kann an
ein System bis zu 8 Receiver angeschlossen werden.
Achten Sie auf die UniCable Frequenzen. Baugleichen Systeme von Kathrein,
Technisat und Megasat verwenden folgende Frequenzen:
IF Channel/Center Freq.:1=1284; 2=1400; 3=1516; 4=1632;
5=1748; 6=1864; 7=1980; 8=2096
Inverto und baugleiche Systeme verwenden folgende.
IF Channel/Center Freq.: 1=1076; 2=1178; 3=1280; 4=1382;
5=1484; 6=1586; 7=1688; 8=1790:
Überprüfen Sie die für Ihre Anlage passenden Frequenzen.
Unter IF Channel können Sie bis zu 8 verschiedene Frequenzen Auswählen,
dabei wird jedem IF Channel automatisch eine Frequenz zugeordnet. Beachten
Sie dass jede Frequenz nur einmal in Ihrer Anlage vorhanden sein darf. Die
Frequenzen sind von Ihrem Einkabelsystem abhängig und dürfen nicht beliebig
geändert werden. Bei Systemen die nicht mit den vorprogrammierten Center
Frequenzen übereinstimmen, können Sie durch Eingabe der Frequenz
anpassen.
ACHTUNG: Die Center Frequenz muss immer mit der Center Nummer
übereinstimmen. Beispiel: Die Frequenz 1284 am Port1, darf nicht auf Port2
gelegt werden. Die passenden Frequenzen und Ports entnehmen Sie der
Beschreibung Ihres UniCable Systems.
Grundsätzlich verwendet man die niedrigste Frequenz für den längsten
Kabelweg zum Receiver.
37
CI MENU
In this menu, insert the smart card, and you will
get smart card info, and you can watch the
scrambled channels.
4.4 TIMES
Time Settings
In this MENU, you can change the TIME MODE
and setting time manually, or adjust GMT time.
The default time setup is auto, but you can
select manual and input manually, select the
time zone of your country and you will get the
correct current time which is based on TDT
(Time and Data Table) in the stream of the
current channel service.
Event Timer
In this menu, you can set up the timer for event
you have selected, so the STB will change the
channel you already set up when the event time
is on due.
Sleep Timer
In this menu, you can set the sleep timer 15min, 30, 45, etc.. 120min, so that the STB will
power off automatically on time.
Standby Hour
In this menu, you can set the standby hours of your STB, so that your STB will power off
automatically on time.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat HD 900 CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat HD 900 CI in the language / languages: English, German as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info