551342
5
Zoom out
Zoom in
Previous page
1/29
Next page
ENGLISH ENGLISH
08
09
3.1 Search
3.1.1 Satellite
3.1.2 LNB type
3.1.3 Low Freq / High Freq
3.1.4 TP Num
3.1.5 Frequency
Frequency of the current transport, Input the value by using the numeric keys.
3.1.6 Symbrate
Symbol rate of the current transport, Input the value by using the numeric keys.
3.1.7 Pol
Press key to change Vertical or horizontal of polarization.
3.1.8 NIT Search
Press key to turn on or off NIT Search.
3.1.9 LNB Power
Press key to select the desired option. If your meter is connected to another recei-
ver through LOOP THROUGH support, in case the other receiver is directly connected to
the LNB, then select OFF.
3.1.10 LNB 22KHZ
22 KHz control is automatically set for each LNB alternative. If “Universal” is selected, 22
KHz control should be off state”.
3.1.11 DisEqc type & Input
Press key to set the port type or number, which get the RF signal from the LNB, if
the LNB is connected to DiSEqC switching box.
3.1.12 Motor
If you use the equipment of motor, According to your motor category, the meter provi-
des DiSEqC1.2/USALS, This will make you have exact information to direct your antenna
toward a satellite.
USALS SET
Press key to select Motor type, then press OK key into interface of motor setting
Press key enter the satellite list. Use key to move the cursor, then press OK key
to select the satellite that you want.
Press key, you can select single/Universal/ UnicableSCR etc, according to your
physical LNB type.
Enter the proper LNB frequency referring
to your LNB using the numeric keys or
pressing key.
Press key into the TP list. Use
key to move the cursor then press OK
key to select the satellite that you want.
Satellite: Press key to select the desired
satellite.
Frequency: Press key to select the TP.
Satellite Pos: Position of satellite, Input the value by
using the numeric keys.
My Longitude & My Latitude : Position of local,
Input the value by using the numeric keys.
Pos Command: Check the signal locked, the motor
moves correct position, press OK key to store the
present position
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat HD 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat HD 1 in the language / languages: English, German as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info