Manual Medisana WL 460 - 45115 (page 17 of 82) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish)

743149

Zoom out

Zoom in

1/82

3.1

Positioning

and setup

Press and hold the Set-button for about 3 seconds, until the time

in the display flashes. Adjust the time with the and buttons.

Press the Set-button again to confirm the time. After that, you may

select one of two alarm settings (AL1 or AL2) or the Zizz (short time

alarm) for adjustment with the , and buttons.

The adjustment needs to be done in the same way with the ,

and buttons as for the time adjustment. Additionally you need to select

the way of alarming: By radio (FM) or by nature sounds (Sound).

Depending on your selection you then need to adjust either the radio

frequency or one of the eight nature sounds. In the following you need to

set the volume and the light brightness level. If you only want to use the

light or sound/radio function, adjust the other function to 0.

If you do not press a button for at least 10 seconds, the device will quit

the setting mode automatically. To activate an alarm you need to press

the corresponding button (see 3.6 Activate an alarm resp. 3.7 Short time

alarm). In case an alarm is activated, the L-Mode- and S-Mode-

buttons are not available.

3.2

Setting the

time and the

alarms

►

◄

9 q

►

◄

►

◄

9 q

8 w

With the S-Mode-button you can choose a sound source. With each

press on the button you change the source in this sequence: SOUND

(nature sounds) - FM (radio) - MPS (MP3 player) - OFF. If you have

chosen the nature sounds, you additionally need to select one of the eight

sounds with the and buttons. For listening to MP3 music, a

MP3 player with 3.5mm jack plug needs to be connected to the connector

for MP3 player and needs to be switched on. The volume can be con-

trolled with the buttons and . g

3.3

Choose the

source of

sound

(S-Mode)

►

◄

9 q

e r

Place the device on a solid and flat surface for use to ensure that it

cannot tip over or fall down. G

Position the device about 40 - 50 cm away from your head, for exam-

ple on a bedside table. G

Plug the cable antenna to the the connector for cable antenna on

the rear side of the device. G

Plug the mains cable end to the connector for power cable on the

rear side of the device and the power adapter to the wall outlet. G

3 Operation

By pressing the L-Mode-button you activate the luminous element ,

the icon appears on the display and the level (0 - 20) of brightness.

The level of brightness increases in increments from 0 to 20. Press the

buttons or to adjust the brightness as desired. G

If you press the L-Mode-button a second time, the light darks down

gradually from setting number to 0, and the icon disappears. For

reading, we recommend brightness level 20. Subsequently, the first relax

mode is activated, in which the colour of light changes about every 8

seconds in this sequence: Red - blue - green - red/blue - blue/green -

green/red - red/blue/green. If you press button the next relax mode is

activated and the colour of light changes about every 4 hours. Press button

again to switch to the next relax mode in which the colour of light will not

change automatically. Choose the light colour by pressing button (next

colour) or (previous colour). The brightness level is not adjustable in

relax mode. If you press the L-Mode-button a third time, all light functions

will be switched off.

3.4

Light

settings

(L-Mode)

6 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Medisana WL 460 - 45115 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 7,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Medisana WL 460 - 45115 Manual

Product: