22
GB
3
Operating
Alternatively, two inhalation masks
(for children and adults)
and a connecting piece
are supplied with the device. They can
be used for inhaling aerosol through the nose. This method is
particularly suitable for children and elderly people.
1. Sit as upright as possible.
2. Plug the mask
with the connecting piece
onto the
nebulizer unit
.
3. Hold the mask pressed lightly over your nose. Make sure that
the mask seals around the nose without being too tight.
4. Switch on the device by pressing the ON/OFF key
. The
equipment-on indicator lamp (green,
) lights up. The
aerosol warms up slightly during operation.
5. Now breathe in and out slowly and deeply through your nose.
You can improve the effectiveness of the therapy if you hold
your breath for a short time after breathing in. However, this is
not necessary for general success of the therapy. It is only
important that you keep quiet and relaxed while breathing in
and out regularly. Do not inhale too fast. If you need a break,
stop using the device for a short time.
NOTE
Hold the device as upright as possible. A slight tilt
does not affect its use (leakage proof). However,
take care during inhalation not to tilt the device
more than 45 ° in any direction.
6. An inhalation application should not exceed 15 minutes.
7. After terminating the inhalation, switch off the device by
pressithe ON/OFF key
even if you have not used up all the
inhalant. The equipment-on indicator lamp (green,
) goes
out.
8. The device switches off automatically after a short time
(automatic limit stop) if the inhalant in the nebulizer is used
up. For technical reasons a small amount remains in the
nebulizer unit.
9. Pour out the rest of the inhalant. Do not use it again.
10.Clean the device immediately after each use. (Also refer to
"Cleaning and maintenance").
3.8
Inhalation using
the mask
