477209
37
Zoom out
Zoom in
Previous page
1/154
Next page
GB
31
Application
The MEDISANA TDP can be used for all kinds of pain or for building up mus-
cles, for long-term therapy as well as for acute treatment.
PLEASE NOTE!
Observe your doctor’s precise instructions and let him show you where
to apply the electrodes. For a successful therapy, the correct position
of the electrodes is an important factor. Carefully write down the set-
tings of frequency, pulse width and current selection your doctor recom-
mended. For this, you should take your MEDISANA TDP to the doctor
so that he can show you the settings.
Special textbooks provide you with detailed information concerning the subject
“pain, transcutaneous electrical nerve stimulation (TENS)”, concerning indica-
tions and the exact electrode application for an effective success of treatment
as well as recommendations for the programs to use and notes on the settings
of frequency, pulse width, time of therapy and current selection.
At the upper side of the device there are two sockets for the connection of elec-
trode lines. The left socket is for channel 1, the right socket is for channel 2.
Connect at least one of the lines by putting the cable tightly into the socket. At
the other end of the cable, you fasten one electrode each.
Place the electrode(s) according to your area of pain (observe your doctors
instructions).
The device must be deactivated before applying the electrodes!
Before applying the electrodes, remove residual skin cream or ointment.
The skin has to be dry and free of fat.
Do not place the electrodes on injured or in amed skin areas (wounds,
pimples, skin rashs, reddenings etc.).
Always place the electrodes according to the doctors instructions be-
fore you switch on the device.
In most cases, the electrodes are placed near the area of pain or directly on
the aching spot.
For the muscle stimulating program, observe your doctor’s instructions con-
cerning the polarity.
If you are not sure how to place the electrode’s polarity, exchange the red
(positive pole, anode) and white (negative pole, cathode) connectors at the
electrodes after half of the therapy time.
Feel for the area of pain, place one electrode directly on it and the second one
to the periphery of the area of pain or, on arms and legs directly opposite.
Application
elds
Connecting the
cables
Applying the
electrodes
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana TDP 88310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana TDP 88310 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info