599203

Medisana SL 100 CONNECT Manual

31
Zoom out
Zoom in
Previous page
1/82
Next page
The blood pressure indicator flashes next to the relevant coloured
bar depending on the WHO blood pressure classification. If the unit has
detected an irregular heartbeat, the arrhythmia display appears
additionally. i
The readings are automatically saved in the selected memory ( or ),
except if a guest mode measuement has been finished (see chapter 3.4
Setting up the user memory). Up to 500 measured values with date and
time can be stored in each memory. i
The measurement results will automatically be transferred via Bluetooth
to receiveready devices. During this process, the Bluetooth-symbol i
will flash. If the transfer was successful, the Bluetooth-symbol will
appear together with "OK" in the display. If the transfer was not success-
ful, "Err" will appear. i
The unit switches off automatically after approx. 1 minute if no buttons
are pressed. The unit may also be switched off using the START/STOP
button .
7.
8.
9.
®
4.3 Transfer via Bluetooth to VitaDock online resp.
®
VitaDock app
The MEDISANA Wrist blood pressure monitor SL 100 connect offers
the possibility to transfer your measured values via Bluetooth to the Vita-
Dock online portal resp. to the VitaDock app. These VitaDock appli-
® ® ®
cations allow the evaluation, storage and synchronisation of your data
between multiple iOS- and Android-devices to have access to it anytime
and anywhere. You may share your results with your friends or your doc-
tor. Therefore you need a free user account, which you can create on the
website www.vitadock.com. For Android or iOS mobile devices, you may
download the respective apps. You will find a detailed instruction for how
to install and use the software on the mentioned website. After each blood
pressure measurement an automatic transfer will be initiated by the device
- Bluetooth therefore should be activated and configured on the receiving
device(s). If you want to transfer the stored values from your SL 100
connect manually, please follow these steps:
Press and hold START/STOP-button for 3 seconds, to enter
the manual transfer mode. i
The Bluetooth-symbol flashes and the transfer begins. i
If the transfer was successful, the Bluetooth-symbol will appear
together with "OK" in the display. If the transfer was not successful,
"Err" will appear.
1.
2.
3.
5.1 Displaying stored results
You can store up to 500 readings (blood pressure and pulse rate with the
time and date) in either one of the two memories in your blood pressure
monitor. The measured values are stored automatically. Press the M-but-
ton to call up the measured values stored. The average values of the
last 3 measurements of the respective user appear on the display. Press
5 Memory
GB
4 Operating / 5 Memory
25
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana SL 100 CONNECT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana SL 100 CONNECT in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info