477213
37
Zoom out
Zoom in
Previous page
1/182
Next page
27
GB
3 Getting Started / 4 Operation
4.1
Fitting the cuff
4.2
Correct position
for taking readings
4.3
Taking blood
pressure readings
Beeps sound when you take a measurement using the MTX blood pressure
meter. You can switch off the beeps by making the following setting.
1. To switch between “beep on” and “beep off”
, press and hold
the TIMER
button
until and “ appear flashing in the display.
2. Press the TIMER button
again. “ ” appears in the display,
followed by “ “.
3. Press the MEMO button
to switch between “ and “ “.
4. Confirm your selection by pressing the START button
(or press the
TIMER button
to make the next setting: “ Switch radio clock on/off “,
see section 3, subsection 3.3, point 4).
If you select “ “, the beep function remains switched off when you
take measurements.
First attach the free end of the cuff’s
air tube to the designated connector
on the unit. Open up the preformed cuff and slip it over the bare left upper
arm just above the elbow region. If wearing tight clothing, ensure that the
circulation in the arm is not impaired when rolling up the sleeve.
The tube should run along the centre of the inner arm towards the palm of the
hand. Ensure that the cuff itself is not twisted in any way.
Fasten the pressure cuff in such a way that it fits tightly but does not constrict
the arm.
• Take readings while in a seated position.
Relax your arm and rest it lightly on a surface such as a table. Relax during
the measuring process: do not move or talk, as this can affect the results.
Single reading
To take a single measurement, you have to switch on the device using the
ON/OFF switch
and be in standby mode. You first have to complete any
settings you require as per section 3, subsections 3.3, 3.5, 3.6 and 3.7.
1. Press the START button
. The device carries out a self test. Once this is
complete, “ “ appears on the display. 5 short beeps sound during the
procedure.
3.7
Switching
beeps
on/off
4 Operation
51080_MTX_West_FINAL_akt.qxd:Blutdruckmessgerät 10.09.2009 11:16 Uhr Seite 27
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana MTX 51080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana MTX 51080 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Spanish, Finnish as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info