477216
25
Zoom out
Zoom in
Previous page
1/130
Next page
19
GB
3 Getting Started / 4 Operation
3.3 Setting the date and time
To set date and time press and hold the TIMER button
for several seconds. The
symbol for the memory selected starts blinking. Now press the TIMER button
again briefly. The year is now shown in the display
and starts blinking. Press
the MEMORY button
to change the year. Press the TIMER button
to go
to month, day and time. Press the MEMORY button
to change the values.
3.4 Setting up the user memory
The MTP gives you the opportunity to assign readings to one of two user memories,
each of which provides 99 memory slots.
Press and hold the TIMER button
for several seconds. The symbol for memory
(USER) 1 in the display
starts blinking. You can switch between USER 1 and
USER 2 by pressing the MEMORY button
.
4 Operation
4.1 Fitting the cuff
First attach the free end of
the cuff’s air tube
to the
designated connector
on
the unit. Open up the cuff to a
ring and slip it over the bare
left upper arm just above the
elbow region. If wearing tight clothing, ensure that the circulation in the arm is not
impaired when rolling up the sleeve. Please ensure that the cuff buckle is never
positioned directly over the artery, as this can result in an incorrect blood pressure
reading.
The tube should run along the centre of the inner arm towards the palm of the
hand. Ensure that the cuff itself is not twisted in any way.
Fasten the pressure cuff in such a way that it fits tightly but does not constrict the
arm. Do this by passing the end through the buckle, pulling it tight and attaching
it to the Velcro fastener.
4.2 Correct position
for taking readings
Take readings while in a seated
position. Relax your arm and
rest it lightly on a surface
such as a table. Relax during
the measuring process: do not
move or talk, as this can affect
the results.
1
51047_MTP_MiniFormat_neu.qxd:OA-Blutdruckmessgerät 27.10.2010 16:
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana MTP 51047 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana MTP 51047 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info