599219

Medisana MTP 51044 Manual

20
Zoom out
Zoom in
Previous page
1/106
Next page
16
5 Memory / 6 Miscellaneous
GB
5.3
Deleting memory
5.2
Displaying
stored results
5.1
Recording
the results
6.1
Guide to
Display Symbols
5.4
Switching off
the unit
6.2
Troubleshooting
This unit features 2 separate memories, each with a capacity of 99 memory
slots. Results are automatically stored in the memory selected by the user.
When the memory is full, the oldest reading is always the first to be deleted.
Press the MEMORY button
to display the stored readings. Initially, the
average, marked “A”, of all readings in the memory selected is displayed.
When the MEMORY button
is pressed again, the individual readings (swit-
ching between systolic, diastolic, pulse and date/time) of the last measurement
stored are displayed.
Press the MEMORY button
again to move backwards through the stored
readings. At the bottom left of the display, above the symbol MR ( MEMORY
RECALL ), the memory number for the reading is displayed. The readings are
displayed in reverse order. If, for example, seven readings are stored in total,
reading No. 7 (the last, most current measurement) will be displayed first,
then reading No. 6 (the second last measurement) etc.
The data can be deleted from the memory selected by pressing and holding the
MEMORY button
for about 7 seconds. After 7 seconds, the display
shows “CL” ( CLEAR ) which indicates that all data have been deleted.
The unit switches off automatically after about 3 minutes, if no button is
pressed during this period. It can also be switched off by pressing the START
button
. The time and the personal memory selected are constantly shown
in the display.
Err Error during measurement
Lo Pulse is lower than 40 beats/minute.
Determining pulse
Batteries low. Please replace batteries.
If the display shows one of the following error messages, this means that the
unit was unable to accurately determine blood pressure.
Error messages
Possible causes and solutions
ERR 1
Measurement of the systolic blood pressure was completed.
Either the connection with the hose has been interrupted or no pulse could be
determined.
Check the connections between the cuff and the main unit.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana MTP 51044 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana MTP 51044 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info