14
3 Operating
GB
• Place the massage seat
on a high chair or armchair
(Car seat)
and attach
it to this by means of the fasteners on the back.
•
Connect the power supply unit cable
or the adapter cable
to the
remote control
.
•
Plug the power supply unit
into the socket or the socket on the adapter
cable
into the cigarette lighter.
• Now sit on the seat
and familiarise yourself with the controls.
The massage seat has four massage zones for specific treatment. These are in
the main areas of tension (shoulders, back, waist and thighs). For each mas-
sage zone, you can select nine different types of massage with three levels of
intensity. You can apply the soothing heat treatment in the waist area sepa-
rately or use it together with the massage function. The built-in timer switches
the appliance off automatically after 15 minutes.
• Function button ON/OFF
(Voltage supply):
Switch on: Press ON/OFF.
Switching off: Press ON/OFF again.
To reset the timer after switching off, press ON/OFF or (heating on/off).
CAUTION
Make sure that the maximum operating time of 15 minutes is
not exceeded.
• Function button MODE
(Massage programme):
Press MODE to go to the selection of massage programmes (1 - 9). The indi-
vidual massage programmes vary in the type of massage and can be used in-
dividually or in combination.
Waves: With this massage type the motors are switched in such a way that
a wave-like massage (Rolling) feeling is generated.
Kneading: This massage type is like a Shiatsu massage.
Tapping: For this type of massage, the motors are switched to generate a
tapping massage.
Pulsate: For this type of massage, the massage motors pulsate in a certain
sequence.
The nine massage programmes also differ in the sequence of motor use (1 - 5)
.
Select one of the following programmes 1 to 9. The background lighting in
the display
lights up green. Everytime you press MODE, you go to the next
massage programme.
3.3
Function button
on the control
unit
3.1
Preparation
3.2
Operating the
unit
