Manual Medisana MC 826 - 88926 (page 25 of 112) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish)

743105

Zoom out

Zoom in

1/112

3 Operating

3.2

Operation

Use the buttons on control pad to operate the massage seat cover:

• Switch on the device by pressing On/Off button

. The power LED

illuminates.

• The buttons

and

control the neck massage. You may

adjust the position and the rotation direction of the both massage

heads. The LEDs next to the buttons

and

indicate, which ro-

tating direction is active.

• The buttons

and

allow a Shiatsu- or tapping

massage for the back area. With the button

you may activate a

spot massage (only with tapping massage).

• When the “Upper Back” massage button

is pressed, the LED

next to the button illuminates and the Shiatsu massage heads

move from the “Park” position at the base of the backrest, up to the

shoulder area, massaging the back in a circular motion whilst doing

so. Once the uppermost position has been reached, the direction of

rotation of the massaging heads is reversed. The heads then travel

down to the centre of the back. Once the heads reach this point, the

direction of rotation is reversed again and then travel up the back

again. If you press button

during the massage, this function is

switched off and the massage heads remain stationary in their cur-

rent position.

• If you press the “Lower Back” massage button

, the LED next to

the button illuminates. The Shiatsu massage heads

travel up and

down the lower half of the back in a circular motion. The reversal of

the direction of rotation takes place when the respective end posi-

tions are reached. Pressing button

during the massage, switches

off this function and the massage heads remain stationary in their

current position.

• If you press the “Full Back” massage button

the function proce-

dure is similar to pressing buttons

and

, except that it is for the

entire back.

• To activate a tapping massage for the selected back area, press

the button

. By repeatedly pressing this button, you can change

the tapping massage mode (mode 1 = constant massage, mode 2

= massage with pauses, mode 3 = alternating mode 1 and mode 2

with change of moving direction). If mode 3 is active and you press

the button

again, the tapping massage will be switched off.

• The button

(level) controls the intensity of the tapping massage.

A press on the button

increases the intensity (2 = medium inten-

sity). A second press on the button

increases the intensity again

(3 = high intensity). After button is pressed a third time, the tapping

massage intensity is set back to intensity 1.

• During the tapping massage, press button

to activate spot mas-

sage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Medisana MC 826 - 88926 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 4,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Medisana MC 826 - 88926 Manual

Product: