743108
25
Zoom out
Zoom in
Previous page
1/112
Next page
17
3 Operating
GB
3.2
Operation
Use the buttons on control pad to operate the massage seat cover:
Switch on the device by pressing On/Off button
5
. The power LED
illuminates.
When the “Upper Back” massage button
7
is pressed, the LED
next to the button illuminates and the Shiatsu massage heads
3
move from the “Park” position at the base of the backrest, up to the
shoulder area, massaging the back in a circular motion whilst doing
so. Once the uppermost position has been reached, the direction of
rotation of the massaging heads is reversed. The heads then travel
down to the centre of the back. Once the heads reach this point, the
direction of rotation is reversed again and then travel up the back
again. If you press button
7
during the massage, this function is
switched off and the massage heads remain stationary in their cur-
rent position.
If you press the “Lower Back” massage button
8
, the LED next to
the button illuminates. The Shiatsu massage heads
3
travel up and
down the lower half of the back in a circular motion. The reversal of
the direction of rotation takes place when the respective end posi-
tions are reached. Pressing button
8
during the massage, switches
off this function and the massage heads remain stationary in their
current position.
If you press the “Full Back” massage button
6
the function proce-
dure is similar to pressing buttons
7
and
8
, except that it is for the
entire back.
You can enhance the shiatsu massage at any time with a vibration
massage for your thighs by pressing the vibration massage button
q
.
The vibration massage in the upper thigh area can also be operated
separately by pressing vibration massage button
q
. Level indicator
LED “L” above the button lights up and both vibration massage mo-
tors are switched on. They begin with a gentle massage. Press but-
ton again and the vibration level increases (medium intensity mas-
sage LED “M”). Press button a third time and the maximum vibration
level (highest intensity massage, LED “H”) is switched on. After but-
ton is pressed a fourth time, the vibration massage is switched off
and LED “H” above the button goes out.
The heat function can be activated at any time with the shiatsu mas-
sage, during which the vibration massage can also be activated.
Press the heat button
9
to activate the function; the LED lights up.
The heat is radiated through the massage heads
3
. Press the
button
9
again to de-activate the heat function; the LED goes out.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana MC 815 - 88916 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana MC 815 - 88916 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info