477195
18
Zoom out
Zoom in
Previous page
1/86
Next page
14
3 Operating / 4 Miscellaneous
GB
On average, the fluorescent lamps need to be changed after approximately
8000 hours’ use. If a lamp fails, it must be replaced.
In order to change a fluorescent lamp, the appliance must be completely
disassembled. Have the lamps changed by your specialist dealer, an authorised
service centre or a qualified specialist to prevent damage to the appliance.
WARNING
• Used fluorescent lamps must be disposed of in accordance with
the applicable regulations on environmentally harmful waste.
If you have any questions about disposal, contact your local
authority or your dealer.
• Before changing the fluorescent lamps, the device must always
be switched off using the ON/OFF switch
and the power
plug
must be disconnected from the mains socket.
Beware of electric shock.
• Be careful when handling fluorescent lamps – they can easily
break.
• Always replace fluorescent lamps with lamps of the same type.
Always replace both lamps at the same time.
• Before cleaning the appliance, switch it off using the ON/OFF button
and
pull the power plug
out of the socket. Risk of electric shock!
• Let the appliance cool down completely before cleaning it.
• Do not immerse the device in water or other fluids.
When cleaning the device, never use aggressive cleaning agents, scouring
agents or solvents; neither should you use scouring pads, steel wool or tough
brushes. This can damage the surfaces.
• Clean the appliance using a soft, lint-free cloth, if necessary dampened with
mild, warm soapy water and well wrung out. Do not allow water to penetrate
the appliance.
• Only use the appliance again after cleaning once it is completely dry.
Do not expose the unit to direct sunlightor high temperature; protect it
against dust and moisture.
• Keep the appliance in a safe, dry place, preferably in the original packaging.
3.2
Changing the
fluorescent lamps
4 Miscellaneous
4.1
Cleaning and
maintenance
45210_LSC_West_ANSON_Print.qxd:Lichtdusche 19.07.2011 8:36 Uhr Seite 14
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana LSC 45210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana LSC 45210 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Spanish, Finnish as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info