496415
20
Zoom out
Zoom in
Previous page
1/90
Next page
14
GB
2 Operation
Off button
If you have activated an alarm but wake up before the set time, you can press
the Off button
to turn off the alarm function. The settings of the alarm func-
tion are kept for the next day. If you do not press the Off button
e.g. if you
wake up before the alarm time and forget to press the Off button
the alarm
function is turned off automatically after about 30 minutes.
You can use Off button
to close any activated function.
Zizz button
If you are taking a short break or what to take a little nap, you can set a short-
time alarm. Press the Zizz button
, on the display
the Zizz icon appears.
Pressing the Zizz button
once sets an alarm to go off in 15 minutes. Every
time you press the button, the time until the alarm is extended by 15 minutes.
The maximum alarm time that can be set for a short-time alarm is 90 minutes.
By pressing the Set button
you confirm your entry and start the countdown
to the alarm at the same time.
In the Zizz function, the setting for sound is preset. If you need to change the
sound, use Set button
to change the setting (see “Setting the time and
alarms manually“ section, page 11-12).
Demo/Snooze/Quick Check button
If you are not using the alarm function, that is, if no alarm was activated by
Alarm button
, the button
can be used for the demo function. Press
the Demo button
. The light gets brighter in 5 second intervals (displayed
levels of brightness 0 – 20). Following that, four sounds of nature are intro-
duced. The entire demo process takes about one minute.
If an alarm has been set but the alarm is not active, you can use the button
to check the settings of the alarm function. Press the Quick Check button
,
and the entered values appear on the display. Press the button
again, to end
the Quick Check function.
If you have activated an alarm time, the countdown for it has already started but
the maximum level of brightness has not been reached, you can use the button
for the snooze function. Press the Snooze button
during 30 minutes and
before setting time, the wake up function (including light and sound) will stop
until the setting time. Then it takes only 1 minute for light and sound to reach
the setting degree. If you press the Snooze button
within 30 minutes after
the setting time, the unit will wake up after 5 minutes, and repeat operation
works within 30 minutes. Every time pressing the Snooze button
stops the
wake up function for further 5 minutes. The maximum to extend the alarm time
is 30 minutes.
If the device is not working correctly, pull the plug from the power point, wait
10 seconds and then plug it in again. Set the time and the other functions again
as described in the “Setting the time and alarms manually“ section, page
11-12.
2.4
Reset function
GA_SAC_West_Final_neu.qxd:Lichtwecker 15.10.2008 12:17 Uhr Seite 14
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana Lichtwekker SAC 45100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana Lichtwekker SAC 45100 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Spanish, Finnish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info