743134

Medisana HP 622 - 61156 Manual

16
Zoom out
Zoom in
Previous page
1/78
Next page
12
2
Operating
GB
Thank you very much for your confidence in us and congratulations!
With this Heat pad for neck and shoulder you have purchased a quality product by
MEDISANA. To ensure the best results and long-term satisfaction with your Heat pad
for neck and shoulder, we recommend that you read the following operating and
maintenance instructions carefully.
2.1 Items supplied and packaging
Please check first of all that the unit is complete and is not damaged in any way. If in
doubt, do not use the appliance. Send it to a service point.
The following parts are included:
• 1 MEDISANA Heat pad for neck and shoulder HP 622 with removable control unit
• 1 Instruction manual
The packaging can be reused or recycled. Please dispose properly of any packaging
material no longer required. If you notice any transport damage during unpacking,
please contact your dealer without delay.
WARNING
Please ensure that the polythene packing is kept away from the
reach of children! Risk of suffocation!
2.2 Operation
You can use the MEDISANA Heat pad for neck and shoulder HP 622 to gently warm
and relax these parts of the body. Using the heat pad stimulates blood circulation in
hardened muscles and helps you to relax after a strenuous day. The heat pad features
an electric temperature control that regulates the temperature according to the chosen
setting.
Make sure, the connection cable of the control unit is properly connected to the plug of
the heat pad. Plug the unit into the mains outlet and move the slider control from position
0 to position 1. The power LED will light up.
When switching up and down the different
levels, the indicator lamp flashes twice briefly and then comes on permanently.
After a few minutes you will be able to feel the pad getting noticeably warmer. If you
require a higher temperature setting, move the switch to the next positions
2, 3, 4, 5
or the
maximum heat setting, position 6. If the heat pad gets too hot for you, move the slider
back to position 5, 4, 3, 2 or 1. After a short time, the heat pad will cool down.
Level 2-6 of the device is intended for heating up, only level 1 is for continuous
operation.
To switch the unit off, move the switch back to position 0. The power LED will go out,
indicating that the unit is switched off. Unplug the unit from the mains outlet.
Move the switch to position 1 for any continuous use. The heat pad will switch off
automatically after approx. 90 minutes of continuous use. To switch it back on again,
move the slider switch to position 0 and then back to the desired heat setting. Unplug
the unit from the mains outlet once you have finished using it.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana HP 622 - 61156 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana HP 622 - 61156 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info