18
3 Measuring procedure
GB
To measure the temperature in your ear, first remove the sensor
cover .
Press the On/Scan button .
If the display is showing the time or the ambient temperatu-
re, press the On/Scan button again . The last temperature that
was measured is displayed (see Fig.).
If the symbol for temperature measurement in the ear appears
in the display , two short beeps will be heard and the device
is ready for use (see Fig.).
Press the On/Scan button again .
As soon as the symbol for continuous temperature measurement
appears (see Fig.), insert the sensor in your ear. Keep the
device still whilst measuring. After just a few seconds a short
beep will be heard and the display will show the measured
body temperature.
After the temperature has been measured, the device automatical-
ly switches to the time and ambient temperature display mode.
To measure the body temperature at your forehead, the sensor
cover must be attached.
Press the On/Scan button .
If the display is showing the time or the ambient temperatu-
re, press the On/Scan button again. Two beeps will be heard,
and the last temperature that was measured will appear on the
display (see Fig.).
Press the On/Scan button again. The symbol for temperature
measurement at the forehead appears on the display (see
Fig.). The device is ready for use.
Hold the device with the sensor against the centre of your
forehead and press the On/Scan button . Hold down the
On/Scan button and drag the thermometer from the centre
of your forehead to the side, as far as your temple. When you
reach this position, release the button.
3.4
Measuring the
temperature in
your ear
3.5
Measuring the
temperature
at your
forehead
4
16
2
3
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
3
3
3
6
2
2
15
2
2
3
4
6
14
2
2
3
2
Stretch your ear
canal by pulling
your ear backwards
and upwards and
carefully insert the
sensor into the ear.
