5
GB
PRODUCT FEATURES:
USING YOUR EYELID MASSAGER
1. Remove any eye make-up and apply a small amount of your favourite eye
cream.
2. Remove the protective cap.
3. Hold the stem of the massager, making sure your skin is in contact with the
smart sensor.
4. When the massage head is placed against your skin the unit will
automatically turn on.
TIP: If the massager doesn’t turn on try applying a small amount of
moisturiser to your hands.
5. Slide the massage head across your skin as shown, applying light pressure to
give a gentle massage. When the correct level of pressure is applied the
massager should smoothly glide across your skin, vibrating gently.
6. Clean the massage head and replace the protective cap after each use.
MAINTENANCE:
Fitting the Batteries
• This eye massager uses one AAA battery, preferably alkaline.
• Battery is supplied with this product.
• To fit the battery, remove the battery cover by sliding it away from the
main unit.
• Insert the one AAA battery taking care to observe the correct polarity.
• Replace the battery cover by sliding it back onto the main unit.
Massage head
Protective cap
Smart sensor
Battery cover
Battery cover
Regular care and cleaning is essential to maintain your Eyelid Massager in peak
working condition. Cleaning and user maintenance shall not be made by children
without supervision. Regularly check the device for signs of damage.
To Store
Store in a safe, dry place, out of children’s reach.
To Clean
Clean the unit after each use with a damp cloth and dry thoroughly before using.
DO NOT use abrasive or chemical cleaners.
Disposal
This product must not be disposed of together with
domestic waste. All users are obliged to hand in all
electrical or electronic devices, regardless of whether
or not they contain toxic substances, at a municipal or
commercial collection point so that they can be
disposed of in an environmentally acceptable manner.
Please remove the battery before disposing of the device/
unit. Do not dispose of old batteries with your household
waste, but at a battery collection station at a recycling site
or in a shop. Consult your municipal authority or your
dealer forinformation about disposal.
SERVICE
The service centre address is shown on the attached leaflet.
DC 200 - Article No: 99121 / EAN Code: 40 15588 99121 9