550249
30
Zoom out
Zoom in
Previous page
1/35
Next page
5.2 Deleting memory
Press M-button to enter the memory recall mode. i
If you only want to delete the last measured value, press and hold the S-
button for approx. 7 seconds. The last measured value will flash two
times and will then be deleted. The display shows "dEL". Press START/
STOP , to exit the delete mode. If you want to delete all stored
values in memory for a user, press and hold M-button AND S-button
simultaneously for approx. 10 seconds. The display shows "dEL ALL".
Now press the to confirm the deletion. The display shows S-button
"dEL OK" - now all stored values for this user are deleted and the unit will
switch off automatically. If you want to abort the deletion process, press
START / STOP while the display shows "dEL ALL". The unit then
switches itself off without deleting any value.
GB
5 Memory / 6 Miscellaneous
26
the M-button again to display the values from the previously stored
measurement. Repeatedly pressing the M-button displays the respec-
tive values measured previously. Press the to browse to the S-button
more actual stored results. The unit switches off automatically after
approx. one minute if no buttons are pressed. The memory recall mode
may be exited at any time by pressing the START/STOP button .
The oldest value is deleted if 180 measured values have been stored in
the memory and a new value is saved.
6.1 Error messages and error remedying
Error indicators:
6 Miscellaneous
Symbol Cause Correction
+ Lo
Low battery
Bluetooth transfer of
data not possible
Cuff not properly
fitted
Cuff too tight
Failure during
inflation
Movement or speaking
during measurement or
pulse too weak
The built-in battery is too low or
empty. Charge the battery.
Check the software and if Blue-
tooth is properly configured and
activated on the receiving units.
Wrap the cuff properly.
Remeasure in correct way.
Wrap the cuff properly.
Remeasure in correct way.
Wrap the cuff properly.
Remeasure in correct way.
remeasure Rest 30 minutes and
in correct way. Do not speak or
move during the measurement.
+ Err
E1
E2
E3
E10/E11
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana BW 300 CONNECT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana BW 300 CONNECT in the language / languages: English, German as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Medisana BW 300 CONNECT

Medisana BW 300 CONNECT User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info