550249
27
Zoom out
Zoom in
Previous page
1/35
Next page
GB
3 Getting started
23
with "Lo") or if nothing appears on the display after the unit has been
switched on, you have to recharge the battery in order to ensure further
operability. When the battery is fully charged and 3 blood pressure
measurements are carried out per day, the energy is sufficient for around
20 days of service.
WARNING - BATTERY SAFETY INFORMATION
• Do not disassemble batteries!
• Increased risk of leakage, avoid contact with skin, eyes and
mucous membranes! If battery acid comes in contact with
any of these parts, rinse the affected area with copious
amounts of fresh water and seek medical attention imme-
diately!
• If a battery has been swallowed seek medical attention
immediately!
• Keep batteries out of children's reach!
• Do not short circuit! There is a danger of explosion!
• Do not throw into a fire! There is a danger of explosion!
• Do not throw used batteries into the household refuse; put
them in a hazardous waste container or take them to a
battery collection point, at the shop where they were
purchased!
• The battery of this device must only be exchanged by
specialized personnel. Never try to disassemble the battery
on your own, but contact the service centre!
1.
2.
3.
4.
5.
6.
3.3 Setting the date and time
Before using the unit, you need to put the LOCK-switch to position
"ON" (green). In "OFF" (red) - position the Bluetooth function is de-
activated and all buttons are locked. i
Press and hold the S-button for at least 3 seconds. i
Firstly, the date figure starts to flash. Press M-button to adjust the
actual month. i
Press the S-button to confirm the setting. i
Now the day figure starts flashing. Proceed accordingly for the input of
day, year, hour and minute (as described under point 3 and 4). i
On completion of the date and time setting, "Ok" appears on the dis-
play. The unit switches off automatically after about 60 seconds, if no
buttons are pressed in order to save power.
3.4 Setting up the user memory
The MEDISANA Wrist blood pressure monitor BW 300 connect gives
you the opportunity to assign readings to one of two user memories, each
of which provides 180 memory slots. Press and hold the M-button for at
least 3 seconds, until the symbol for User 1 appears in the display.
By pressing M-button you can switch User 1 and User 2 or Guest .
If you choose "Guest", the values of the reading will not be saved. i
Press the S-button to confirm your selection.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana BW 300 CONNECT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana BW 300 CONNECT in the language / languages: English, German as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Medisana BW 300 CONNECT

Medisana BW 300 CONNECT User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info