599211
30
Zoom out
Zoom in
Previous page
1/158
Next page
4.1 Fitting the cuff
Attach the clean cuff to the left wrist which is
free from clothing with the palm of the hand
facing upwards (fig.1).
There should be a gap of approx. 1 cm between
the cuff and the palm of the hand (fig.2).
Press the Velcro tape firmly around the wrist
ensuring that it is not so tight that it could falsify
the measured result (fig.3).
Correct position for taking readings:
Carry out the measurement whilst seated.
Relax your arm and place it comfortably, on a
table for instance. Raise the wrist so that the cuff
of the monitor is at heart level (fig. 4, position a =
too high, b = correct, c = too low).
1.
2.
3.
4.
Relax during the measuring process:
do not move or talk, as this can affect
the results.
With repeated measurements, blood
accumulates in the arm which can
lead to false reading. Consecutive
blood pressure measurements should
be repeated after 3 minutes pause or
after the arm has been held up in
order to allow the accumulated blood
to flow away.
4.2 Taking a blood pressure measurement
After appropriate positioning of the cuff, the measurement can begin.
Before using the unit, you need to put the LOCK-switch to position
"ON" (green). In "OFF" (red) - position the Bluetooth function is deacti-
vated and all buttons are locked. i
iSwitch the unit on by pressing the START/STOP button .
All display characters are shortly shown in the display. This test can be
used to check that the display is indicating properly and in full. The unit
is ready for measurement and the number 0 appears. i
The device automatically inflates the cuff slowly in order to measure your
blood pressure. The rising pressure in the cuff is shown on the display.
When the device detects the signal, the heart symbol on the display
starts to flash. i
If a result is determined, the device slowly will release the air from the
cuff. The systolic and diastolic blood pressure and the pulse value with
the time value appear on the display.
1.
2.
3.
4.
5.
6.
approx. 1 cm
1
2
3
4
a
b
c
GB
4 Operating
24
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana BW 300 CONNECT pols at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana BW 300 CONNECT pols in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info