550248
29
Zoom out
Zoom in
Previous page
1/36
Next page
The blood pressure indicator flashes next to the relevant coloured bar depending
on the WHO blood pressure classification. If the unit has detected an irregular heart-
beat, the arrhythmia display appears additionally. i
The readings are automatically saved in the selected memory ( or ), except if
a guest mode measuement has been finished (see chapter 3.4 Setting up the user
memory). Up to 500 measured values with date and time can be stored in each me-
mory. i
The measurement results will automatically be transferred via Bluetooth to receive-
ready devices. During this process, the Bluetooth-symbol will flash. If the transfer
was successful, the Bluetooth-symbol will appear together with "OK" in the dis-
play. If the transfer was not successful, "Err" will appear. i
The unit switches off automatically after approx. 1 minute if no buttons are pressed.
The unit may also be switched off using the START/STOP button .
7.
8.
9.
® ®
4.3 Transfer via Bluetooth to VitaDock online resp. VitaDock app
The MEDISANA Upper arm blood measurement monitor BU 550 connect offers
the possibility to transfer your measured values via Bluetooth to the VitaDock online
®
portal resp. to the VitaDock app. These VitaDock applications allow the evaluation,
® ®
storage and synchronisation of your data between multiple iOS- and Android-devices
to have access to it anytime and anywhere. You may share your results with your
friends or your doctor. Therefore you need a free user account, which you can create
on the website www.vitadock.com. For Android or iOS mobile devices, you may down-
load the respective apps. You will find a detailed instruction for how to install and use
the software on the mentioned website. After each blood pressure measurement an
automatic transfer will be initiated by the device - Bluetooth therefore should be acti-
vated and configured on the receiving device(s). If you want to transfer the stored
values from your BU 550 connect manually, please follow these steps:
Press and hold START/STOP-button for 3 seconds, to enter the manual
transfer mode. i
The Bluetooth-symbol flashes and the transfer begins. i
If the transfer was successful, the Bluetooth-symbol will appear together with
"OK" in the display. If the transfer was not successful, "Err" will appear.
1.
2.
3.
5.1 Displaying stored results
You can store up to 500 readings (blood pressure and pulse rate with the time and
date) in either one of the memories (U1 and U2) in your blood pressure monitor.
The measured values are stored automatically. Press the M-button to call up the
measured values stored. The average values of the last 3 measurements of the res-
pective user appear on the display. Press the M-button again to display the values
from the previously stored measurement. Repeatedly pressing the M-button dis-
plays the respective values measured previously. Press the S-button to browse to
the more actual stored results. The unit switches off automatically after approx. one
minute if no buttons are pressed. The memory recall mode may be exited at any time
by pressing the START/STOP button . The oldest value is deleted if 500 measur-
ed values have been stored in the memory and a new value is saved.
5 Memory
4 Operating / 5 Memory
25
GB
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana BU 550 CONNECT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana BU 550 CONNECT in the language / languages: English, German as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Medisana BU 550 CONNECT

Medisana BU 550 CONNECT User Manual - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info