477269
24
Zoom out
Zoom in
Previous page
1/110
Next page
16
2 Operation
GB
Adjustments on the pump unit
Spa intensity
Press the power button
once. The appliance switches on and starts operating
in the lowest mode (Low) immediately. The Low LED lights up green.
Press the power button
again. Now the Medium LED lights up green. The
appliance now operates in the medium mode (Medium).
Press the power button
a third time. Now the High LED lights up green.
The appliance now operates in the highest mode (Hi).
Press the power button
a fourth time. Now the Program LED lights up green.
The appliance now operates in the automatic interval massage program
(Program). The appliance runs through the three levels of intensity in succession
(Low, Medium, High) and then back to the beginning.
• The next time you press the power button
, the appliance switches off again.
Preset operation time
The timer button
allows you to choose between three time settings: 30, 20
or 10 minutes. It is not advisable to use the appliance for more than 30 minutes
(see safety instructions). Leave an interval of at least 30 minutes before you switch
on the appliance again.
Press the timer button
once. The operation time is set for 10 minutes. The
10 LED starts flashing yellow.
Press the timer button
once again. The operation time is set for 20 minutes.
The 20 LED starts flashing yellow.
Press the timer button
a third time. The operation time is set for 30 minutes.
The 30 LED starts flashing yellow.
Once the preset time has elapsed, the appliance switches off automatically. If no
time has been set, the appliance switches off after 30 minutes.
Switching on the heat function
NOTE
The heat function is not designed for the water temperature or
for heating up a cold bath. Warming the air created by the spa
bubbles, prevents the bath water from cooling down while it is
in use.
If you want to use the heat function, press the heat button
. The LED next to
it lights up red. Press the heat button
again to switch off the heat function and
the LED light disappears.
Adjustments on the remote control
If you want to use the infrared mode
, firstly get into the bath carefully and
switch on the appliance by pressing the power button
on the remote con-
trol.
88382_BBS_West_FINAL.qxd:Luftsprudelbad 08.10.2009 14:45 Uhr Seite 16
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana BBS 88386 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana BBS 88386 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Spanish, Finnish as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info