581797

Medisana 88939 - MC 825 Manual

26
Zoom out
Zoom in
Previous page
1/110
Next page
18
3 Operating
GB
down to the base of the backrest. Once the heads reach this point, the direction of rotation is reversed
again and then travel up the back again.
Upper Back button
(upper back)
The Shiatsu massage heads
travel up and down the upper half of the back in a circular motion. The
reversal of the direction of rotation takes place when the respective end positions are reached.
Lower Back button
(lower back)
The Shiatsu massage heads
travel up and down the lower half of the back in a circular motion. The
reversal of the direction of rotation takes place when the respective end positions are reached.
BACK HEAT button
The heat function can be activated at any time with the shiatsu massage, during which the akupressur
Massage can also be activated. Press the BACK HEAT button
to activate the function; the LED on
the control unit and the massage heads light up red. The heat is radiated through the massage heads
. Press the button
again or stop the Shiatsu massage, to de-activate the heat function; the LED
and the red light of the massage heads go out.
AIR BACK button
/ AIR SEAT button
(acupressure buttons)
An acupressure massage in the waist and thigh area can be added to the Shiatsu massage function at
any time by pressing buttons
/
.
The acupressure massage can also be used separately.
Switch on the device by pressing ON/OFF button
.
Press the button for the acupressure massage
/
. The Intensity LED lights up and both air cushions
/
inflate. They begin with a gentle massage. Pressing the Intensity button
increases the intensity
of the massage (medium intensity massage). The LED M lights up. Pressing the Intensity button
again
activates the strongest massage setting (highest intensity massage). The LED H lights up. Once button
/
is pressed the acupressure massage switches off and the LED goes out.
Do not use the massage device for longer than 15 minutes and then allow it
to cool. Using the device for longer can overstimulate the muscles and cause
tension instead of relaxation.
The massage can be finished at any time by pressing the ON/OFF
button.
After each use, switch the device off using the ON/OFF button
and remove
the plug
from the mains socket. Always store control unit in its bag
.
3.1
To switch off the device
Press the ON/OFF button
. The power LED begins to flash and the massage heads travel back
down to the “Park” position. When this position is reached, the LED extinguishes. If you press the
ON/OFF button
while one of the massage functions is switched on, the massages in neck/
shoulder, waist and seat just stop immediately, including heat function. First the massage heads in the
back travel downwards to the “Park” position. The LED flashes meanwhile and then extinguishes.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana 88939 - MC 825 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana 88939 - MC 825 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info