428963
26
Zoom out
Zoom in
Previous page
1/150
Next page
20
3 Application
GB
3.1
Inserting/
changing
batteries
3.2
Connecting
the cable and
electrodes
Remove the lid from the battery compartment
on the back of the device.
Insert the four enclosed batteries (type AAA (LR03), 1.5 V). Pay attention to the
polarity of the batteries as indicated in the diagram in the battery compartment.
Replace the lid of the battery compartment.
When the batteries become weaker, the battery symbol
on the display
lights up. If the device does not go on after pressing the ON/OFF switch
,
please insert new batteries.
WARNING BATTERY SAFETY INFORMATION
Do not disassemble batteries!
• Remove discharged batteries from the device immediately!
Increased risk of leakage, avoid contact with skin, eyes and
mucous membranes! If battery acid comes in contact with skin,
rinse the affected area with copious amounts of fresh water
and seek medical attention immediately!
If a battery has been swallowed seek medical attention
immediately!
• Replace all of the batteries simultaneously!
• Only replace with batteries of the same type, never use different
types of batteries together or used batteries with new ones!
• Insert the batteries correctly, observing the polarity!
• Remove the batteries from the device if it is not going to be
used for an extended period!
• Keep batteries out of children's reach!
Do not attempt to recharge these batteries! There is a danger of
explosion!
• Do not short circuit! There is a danger of explosion!
Do not throw into a fire! There is a danger of explosion!
• Do not throw used batteries into the household refuse; put
them in a hazardous waste container or take them to a battery
collection point, at the shop where they were purchased!
Cable connection
The device is switched off. To connect the device, push the device plug of the
cable
into the corresponding socket on the device. Plug the red plug (+) into
the red socket, and the black plug (
-
) in the black socket on the device.
Attaching the electrodes
The device is switched off. Remove the carrier film with the two electrode pads
from the transport bag. Plug the two electrode plugs at the other end of the
cable
into the sockets on the electrodes. Leave the electrode pads on the
carrier film for protection while doing this.
85500_EPD_West_Final.qxd:Haar-Entfernungs-System 14.01.2009 11:42 Uhr Seite 20
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana 85500 epd at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana 85500 epd in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info