459673
38
Zoom out
Zoom in
Previous page
1/143
Next page
9
UK
SHIFT function
Some of the keys of the universal remote control can have
two assigned functions. To use these functions, briefly
press the
SETUP
key (the source key will light up) and then
press one of the function or number keys.
If no other key is pressed for 15—20 seconds after the
SETUP
key was briefly pressed, the SHIFT function will not
become active.
Deleting functions
Deleting commands for only one source key
1. Keep the
SETUP
key pressed down for approx. 3
seconds, the background lighting of the source key will
flash for a short time and then remain permanently lit.
2. Briefly press the desired source key (
TV, VCR, DVD,
ASAT, DSAT, CBL, CD, AUX)
.
3. Press the
LEARN
key twice.
4. Press the
SETUP
key.
All commands of the relevant source key have now been de
leted.
Deleting commands for all source keys
To delete all commands altogether, proceed as follows:
1. Keep the
SETUP
key pressed down for approx. 3
seconds, the background lighting of the source key will
flash for a short time and then remain permanently lit.
2. Press the
LEARN
key twice.
3. Press the
SETUP
key.
All codes that were programmed using the learn function
have now been deleted.
Programming macros
Using a macro, you can save a chain of commands, meaning
that several functions can be executed consecutively. You
can program three macros and store them on the number
keys
1, 2
and
3
.
Each macro can include up to ten key commands. A macro
can include different devices. In this way you could, for ex
ample, switch on the TV set, the desired channel, the video
recorder and the recording function.
1. Switch the device(s) on.
2. Keep the
SETUP
key pressed down for approx. 3
seconds until the background lighting of the source key
flashes briefly and then remains permanently lit.
3. Press the
MACRO
key. The source key will flash briefly.
4. Press the number under which the macro should be
stored, i.e. “
1
”, “
2
”, or “
3
”.
5. Press a source key (device selection, e.g.
VCR
) for the
device with which you would like to start (first key com
mand).
6. Now carry out the functions that you would like to save
as a macro in the desired sequence. You may now carry
out nine key commands. The source key will extinguish
briefly each time the button is pressed.
7. To save the macro, press
MACRO
(the macro will be
saved automatically after the 10th key has been pres
sed). The source key will extinguish permanently.
URC MD 81035 ML.book Seite 9 Mittwoch, 8. Februar 2006 12:35 12
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medion MD81035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medion MD81035 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Medion MD81035

Medion MD81035 Additional guide - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info