520812
4
Zoom out
Zoom in
Previous page
1/21
Next page
E
E
N
N
G
G
L
L
I
I
S
S
H
H
2
Setting up location
In the first hours of operation, new devices may emit a typical, unavoidable but completely
harmless smell, which will decline increasingly in the course of time.
We recommend you to ventilate the room regularly, in order to counteract the formation of
the smell. During the development of this product, we have made sure that the applicable
limits are clearly fallen below.
Keep your LCD display away from moisture and avoid dust, heat and direct sunlight.
Failure to observe these instructions can lead to malfunctions or damage to the LCD display.
Do not operate your device in the open air, because external influences, such as rain,
snow, etc. could damage the device.
Do not place any containers filled with liquid (vases or similar containers) on the de-
vice. The container could tip over and liquid can impair electrical safety.
Do not place any open sources of fire (candles or similar objects) on the device.
Pay attention to sufficiently large clearances in the wall cupboard. Maintain a minimum
clearance of 10 cm around the device for sufficient ventilation.
Place and operate all units on a stable, level and vibration-free surface in order to avoid
the LCD display from falling.
Avoid the effects of dazzling, reflections and a too distinct contrast between light
and darkness, in order to protect your eyes.
Take regulator breaks when working with your LCD monitor in order to avoid tension and
fatigue.
The optimum viewing distance is 5 times the screen diagonal.
Intended Environment
The LCD monitor can be operated at an ambient temperatures of between +41°F and +95°F
(5° C to 35° C) and at a relative humidity of between 20% and 85% (without condensation).
When switched off, the monitor can be stored at between -4°F and +140°F (-20° C - +60° C).
After transporting your LCD monitor please wait until it has assumed the ambient tempera-
ture before connecting and switching it on. Extremely high variations in the temperature
or humidity may result in condensation forming on the inside of the LCD monitor which
could cause an electrical short-circuit.
Connecting
Observe the following instructions to connect your LCD monitor properly:
Power Supply
Operate your LCD monitor mains (power supply) only on grounded sockets with AC 100-
240V~/ 50-60 Hz. If you are not sure about the power supply at your location, check with your
power company.
For additional safety we recommend use of an excessive voltage protection device to pro-
tect your LCD monitor from damage resulting from voltage surges or lightning.
To interrupt the LCD monitor from mains (power supply) disconnect the plug from the
socket.
The power socket must be in the vicinity of your LCD monitor and within reach of the
power cables.
If you use an extension cable, ensure that it fulfills the VDE requirements. Please ask
your electrician.
You should lay the LCD Monitor cables in a manner that no one can trip or step on it.
To avoid damage of cable do not place any objects or furniture on the cable.
Your device has an On and Off switch. The LCD monitor can be switched on or off by means
of it. No electricity is consumed if the switch is at OFF (0).
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medion MD30004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medion MD30004 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info