41821
34
Zoom out
Zoom in
Previous page
1/143
Next page
5
UK
Manual code search
Carry out a manual search as follows:
1. Switch the relevant device on manually.
2. Keep the
SETUP
key pressed down for approx. 3
seconds, the background lighting of the source key will
flash for a short time and then remain permanently lit.
3. Briefly press the desired source key (
TV, VCR, DVD,
ASAT, DSAT, CBL, CD, AUX)
.
4. Keep pressing the (up to 350 times)
POWER; P+
or
P–
or (VCR only) key until the device that is to be con
trolled switches off, changes channels, or responds
accordingly.
The code search begins at the currently stored three
digit number.
5. Briefly press
OK
to save the code.
Due to the considerable quantity of different code
numbers, up to 350 different codes are preprogram
med per device type. In individual cases it may be
possible that only the most common main functions
are available. For some particular device models, the
described method may not lead to success.
Automatic search
If your device does not respond to the remote control even
though you have tried all of the codes listed for your device
type and the relevant brand, then try using the automatic se
arch. This will enable you to find codes for brands that were
not listed in the device Code List.
1. Switch the relevant device on manually.
2. Keep the
SETUP
key pressed down for approx. 3
seconds, the background lighting of the source key will
flash for a short time and then remain permanently lit.
3. Briefly press the desired source key (
TV, VCR, DVD,
ASAT, DSAT, CBL, CD, AUX)
.
4. Point the remote control at the device and briefly press
the
P+
key once.
If the device does not have a program function, then
instead of pressing
P+
press or
POWER
.
The remote control will begin the code search after 6
seconds and will transmit all codes consecutively at
onesecond intervals (see also the next section). The
source key will light up for each transmission.
5. As soon as the device responds to the remote control,
press
OK
. – If you missed pressing
OK
in time, you can
go back in steps to the code whichwhich the device
responded by using the
P–
key.
To cancel the search, press
EXIT
.
1 second or 3 second intervals
If you want the remote control to transmit a new code every
3 seconds instead of every second, proceed as follows:
Within 6 seconds of pressing the
P+
key (or or
PO-
WER
) as described in Point 4, press the
P+
or
P–
key
again. The remote control will now only transmit a new code
every 3 seconds. This gives you more time, but the proce
dure will also take longer.
URC MD 81035 ML.book Seite 5 Mittwoch, 8. Februar 2006 12:35 12
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medion MD 81035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medion MD 81035 in the language / languages: English, German, Dutch, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Medion MD 81035

Medion MD 81035 Additional guide - Dutch - 13 pages

Medion MD 81035 User Manual - Dutch - 13 pages

Medion MD 81035 User Manual - Dutch - 36 pages

Medion MD 81035 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info