141354
13
Zoom out
Zoom in
Previous page
1/156
Next page
Basic functions
13
DE
EN
NO
FI
DK
SE
Basic functions
Turning the LCD TV on and off
1. Put the main switch on the lower section of the television in the ‘I’ (ON) setting. The device will go into Standby Mode
and the display on the front will shine red.
2. Press either the STANDBY button on the device or on the remote to switch the device on.
3. You will switch the device back to the Standby Mode with the STANDBY button.
4. Put the main switch on the lower section of the television in the ‘0’ (OFF) setting, in order to switch the device off com-
pletely.
Navigating within the Menu
1. Press the MENU button [8], in order to activate the OSD.
2. Select the options from the Main Menu with the / directional buttons.
3. Confirm the option selected from the Main Menu and open the sub-menu with the / directional buttons.
4. Select the options from the sub-menu with the / directional buttons.
5. Confirm the option selected from the sub-menu in which you want to make changes or settings with the / direc-
tional buttons.
6. Set the required vale or make a different selection with the / directional buttons.
7. You will return to the superordinate Menu with the MENU button [8].
8. You will close the Menu and confirm the selection at the same time with the EXIT button [7].
Note
The Menu will close automatically if you do not press a button for longer than 15 seconds when operating the
OSD. However, you can vary the length of the display. Read the ‘Menu SYSTEM Menu’ on Page 19 for this.
Language setting
The OSD of your LCD TV is set to English in the delivery status. Set the OSD to the language that you require as follows:
1. Press the MENU button [8] on the remote control.
2. Select the SYSTEM Menu point (4th Menu point in the Main Menu strip on the left of the picture [MAIN MENU] with
the directional button.
3. Confirm with the directional button. The SPLEEP TIMER entry will be emphasized.
4. Select the OSD LANGUAGE Menu point with the directional button. The OSD Menu will be faded out and the OSD
LANGUAGE ENGLISH strip will appear on the screen.
5. Select the language that you require with the  directional buttons.
6. Confirm your selection with the OK button. The OSD will appear.
7. Press the button EXIT [7], to exit the OSD menu.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medion md 30036 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medion md 30036 in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Medion md 30036

Medion md 30036 User Manual - German - 27 pages

Medion md 30036 User Manual - Dutch, French, Italian, Portuguese, Turkish, Spanish - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info