747512
17
Zoom out
Zoom in
Previous page
1/22
Next page
17
10.1.4. The picture flickers up/down or is inconsistent:
Check:
Signal connector: If the pins are bent, contact your customer service.
Signal connector: The connectors of the signal cable must be inserted firmly in the sockets.
Graphics card: Check if the settings are correct.
Refresh rates. Select valid settings in your graphics settings.
Monitor output signal. The monitor output signal of the computer must match the technical data of the monitor.
Remove disruptive devices (cordless phones, loudspeakers or similar) from the environment of the monitor.
Avoid using monitor extension cables.
10.1.5. Characters are shown dark, the picture is too small, too big, or not centred, etc.:
Adjust the respective settings.
10.1.6. Colours are not shown cleanly:
Check the signal cable pins. If the pins are bent, contact your customer service.
Adjust the colour settings in the OSD menu.
Avoid using monitor extension cables.
10.1.7. The display is too bright or too dark:
Check if the video output level of the computer matches the technical data of the monitor.
Select Autom. adjustment to optimise the settings for brightness and contrast. For optimisation, the display
should show a text page (e.g. Explorer, Word, ...).
10.1.8. The picture shakes:
Check if the operating voltage matches the technical data of the monitor.
Select Autom. adjustment to optimise the settings for pixels and phase synchronisation. For optimisation, the
display should show a text page (e.g. Explorer, Word, ...).
10.2. Do you need more help ?
If the above suggestions did not solve your problem please contact us. The following information would help us:
How is your computer configured?
What peripheral devices do you use?
What messages appear on the screen?
What software were you using when the problem occurred?
What steps have you already taken to try and rectify the problem?
Please provide your customer number if you have one.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medion MD 21290 - AKOYA P57090 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medion MD 21290 - AKOYA P57090 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Medion MD 21290 - AKOYA P57090

Medion MD 21290 - AKOYA P57090 User Manual - German - 22 pages

Medion MD 21290 - AKOYA P57090 User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info