747633

Medion MD 16480 Manual

54
Zoom out
Zoom in
Previous page
1/86
Next page
DE
FR
EN
NL
55 of 86
6. Using the appliance for the fi rst time
1. Set the control knob to “0” and press the tilt lever to raise the tilting arm.
2. Place the mixing bowl on the fixing tongues in the base and rotate it as far as it will go in the direction
indicated by the LOCK arrow to lock it in place.
DANGER!
Risk of injury by rotating and moving parts
Before changing accessories or attachments that move when in
operation, the appliance must be switched off and disconnected from the supply. There is a
risk of a crushing injury!
3. Fit the splash guard onto one of the three mixing tools (dough hook, beater, whisk), then fit the tool to the
machine as illustrated.
The mixing tools can only be inserted in the machine and rotated if the projections are seated in the
corresponding indentations.
The guard disc prevents the drive shaft from coming into contact with dough.
4. The splash guard for the mixing bowl is ready to fit and can simply be placed over the bowl after it has
been locked in place:
5. Press the tilt lever and lower the tilting arm. Make sure that it is latched home on the bottom part of the
housing. Reconnect the appliance to the mains supply and switch on at the wall socket.
6. The control knob can now be set for the required speed. The recommended speed settings for various
uses are listed below.
• Use the dough hook at speed 1, 2 or 3 for heavy doughs like bread, shortcrust pastry or pasta.
• You can use the beater for many ingredients ranging from medium-weight doughs, such as cake mixes,
to lighter mixtures, such as pancake batter and sponge mix. Use the beater at speed 4, 5, 6, 7 or 8 as
required.
• If you are whipping cream, egg white or blancmange, use the whisk at high speed (7 or 8).
• For short, powerful and continuous pulse movements, turn the control knob repeatedly to the “P”
position.
• The mincer can be used to make various dough products such as noodles and biscuits, to produce
kebabs, to mince meat or to fi ll sausages. The required speed setting is 6, 7 or 8.
7. After the test run, turn the control knob to “0”.
8. Press the tilt lever and lift the tilting arm, then remove the mixing tool from the bayonet fitting. Return the
tilting arm to its lowered position.
9. Switch off at the wall socket and unplug.
16480 DE-FR-EN- NL eCommerce Content Final REV1.indb 5516480 DE-FR-EN- NL eCommerce Content Final REV1.indb 55 01.09.2015 09:59:4901.09.2015 09:59:49
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medion MD 16480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medion MD 16480 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info