611108

Medion MD 14659 Crane Manual

11
Zoom out
Zoom in
Previous page
1/21
Next page
12 of 22
866-633-4660
www.medion.us
AFTER SALES SUPPORT
MODEL: MD 14659 / ITEM CODE# 1056 / 01/2014
7 Getting started
Inserting batteries
The scale is operated with a 3 V button cell battery, size CR 2032.
The battery is inserted in the scale at the factory. In order to activate
the scale, pull the flap of the protective foil to remove it from the battery
compartment. If the foil is not removed, the scale will not function.
To remove or change the battery, open the battery compartment cover on
bottom of the scale.
When inserting the battery, ensure that the +/− terminals are correct (with
the positive pole facing up).
When the battery has been inserted and the battery compartment is
closed, place the scale on the floor and place a little weight onto the scale.
Wait until the scale switch off. The scale is now calibrated.
If the screen shows “Lo” or the display’s intensity falls, the battery must be
replaced.
Only insert one new battery.
Do not expose a scale containing a battery to direct heat or sunlight. For
example, do not place the scale on a radiator.
If the scale is not going to be used for long periods, remove the battery.
Please also note the section “Handling batteries properly“ on page 6 to
ensure you use the batteries correctly.
14659 50042748 BLACK USA Content final.indd 1214659 50042748 BLACK USA Content final.indd 12 25.09.2013 13:44:0325.09.2013 13:44:03
Downloaded from www.Manualslib.com manuals search engine
… 11 …


Need help? Post your question in this forum.

Forumrules
1

Forum

medion-md-14659-crane

Reset search

  • My scale continuously reads low after replacing 20 batteries I am looking for an email address to contact you the phone number continues to hang up on me and doesn’t give me an opportunity to speak to anyone 866-633-4660 My scale model number is 14 659 item number 1056 My email address is Jonesy 2594@gmail.com that JONESY 2594@gmail.com thank you Submitted on 23-12-2021 at 17:42

    Reply Report abuse

  • I am not getting an accurate weight showing on the display. How do I cancel the incorrect numbers? Submitted on 1-5-2017 at 03:17

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medion MD 14659 Crane at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medion MD 14659 Crane in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info