73 of 82
25.3. Additional Card Material
Your navigation system is already equipped with digitalised map material in
the internal memory and/or memory card at the factory. Depending on the
configuration, additional maps may be included on your navigation CD/DVD.
You will be able to transfer these cards to a memory card immediately. It is
recommended that you use an external card reader (see also page 72). The GoPal
Assistant supplied with the device enables a simple and individual compilation of
the map material to be transferred.
Depending on the amount of map data on the navigation CD/DVD, memory cards
with capacities of 256 MB, 512 MB, 1.024 MB or more may be required.
You can obtain additional memory cards in specialist stores.
25.3.1. Transfer of Card Material to a Memory Card
The transfer of additional card material to a memory card can take place through
Explorer on your PC via the following steps:
Insert the CD/DVD with the card material required.
Start your workstation and select your CD/DVD Drive.
Copy the file with the .psf ending out of the Directory of the region that you
require to the MapRegions Directory on your memory card, from the CD/DVD.
You can transfer several files with map material to your memory card, depending on
the capacity of the memory card.
If you have copied digitized maps of several countries or country groups onto your
memory card, you will be required to select the desired map in the navigation
application of your device.
25.3.2. Alternate Method of Installing Navigation Software
(using a memory card)
The software for your navigation system can be installed directly from a memory
card.
The pre-installed software may have to be uninstalled beforehand (see the chapter
on “21. Special CleanUp Function”, page 64).
You will be requested to install the navigation software during the initial
adjustment. Please proceed as follows:
Remove the memory card from the packaging carefully. Ensure the contacts are
not touched or soiled.
Push the memory card into the corresponding slot until it engages.
Click on OK, in order to install the application.
The main screen, through which you will now be able to carry out the navigation
settings, will appear after all data has been copied to your navigation system.
E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 73E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 73 21.07.2014 10:49:3721.07.2014 10:49:37
