623505
35
Zoom out
Zoom in
Previous page
1/68
Next page
11 of 44
5. Connecting
PLEASE NOTE!
The devices listed are not necessarily supplied. You only
need to connect up those components that you want
to operate on your PC. If you do not have the described
device, you can simply skip the relevant point and carry
out these steps at a later point in time if required.
5.1. Connecting the cables
Follow the instructions below to connect your PC correctly and safely:
Maintain a distance of at least one metre from sources of high-frequency and
magnetic interference (TV sets, loudspeakers, mobile phones, DECT telephones,
etc.) in order to avoid malfunctions and data loss.
Please note that only shielded cables that are shorter than 3 metres may be con-
nected to the external interfaces of this PC. Please only use double-shielded ca-
bles for printer cable connections.
Position the cable so that it cannot be stepped on or tripped over.
To avoid damaging the cables, do not place any objects on them.
In order to prevent cable breaks, do not crush or bend cables, because this could
cause a short circuit.
Do not apply force when connecting cables and plugs and make sure that con-
nectors are the right way round.
Do not connect any devices to the PC which do not meet the requirements set
out in the EN60950 standard “Information Technology Equipment – Safety” or
the EN60065 standard Audio, video and similar electronic apparatus - Safety re-
quirements.
Only connect peripheral devices – such as keyboard, mouse and monitor, etc. –
when the PC is switched off to avoid damage to the PC or the devices.
Some devices may also be connected while the computer is running. This is gen-
erally the case for devices with a USB connection. In all cases, observe the rele-
vant operating instructions.
In addition, when connecting your peripherals only use the connecting cables
supplied with those devices.
Do not expose plug connections to impacts/pressure, e.g. from lateral forces.
This could cause internal and external damage to the product.
When you disconnect a cable from your device, pull it out by holding the plug
and not the cable.
Do not exchange the supplied cable for another one. Use only the supplied ca-
ble as this cable has been extensively tested in our laboratory.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medion AKOYA P5207 F - Windows 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medion AKOYA P5207 F - Windows 10 in the language / languages: English as an attachment in your email.

The manual is 16,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Medion AKOYA P5207 F - Windows 10

Medion AKOYA P5207 F - Windows 10 User Manual - German - 70 pages

Medion AKOYA P5207 F - Windows 10 User Manual - Dutch - 70 pages

Medion AKOYA P5207 F - Windows 10 User Manual - French - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info