617750
65
Zoom out
Zoom in
Previous page
1/67
Next page
Instruction Manual
29.5 cm / 11.6“ Notebook
MEDION
®
AKOYA
®
1 of 66
Table of Contents
1. About these Instructions ............................................................................. 5
1.1. Symbols and Key words used in these Instructions ................................... 5
1.2. Proper Use ................................................................................................................. 6
1.3. Declaration of Conformity ...................................................................................6
2. Safety Instructions ....................................................................................... 7
2.1. Dangers for children and people with reduced ability to operate
electronics ................................................................................................................. 7
2.2. Operational Safety .................................................................................................. 7
2.3. Never Carry Out Repairs Yourself ..................................................................... 9
2.4. Data Backup ..............................................................................................................9
2.5. Setup Location (in Notebook Mode) ...............................................................9
2.6. Environmental Requirements ..........................................................................10
2.7. Ergonomics .............................................................................................................10
2.8. Connecting..............................................................................................................11
2.9. Cabling......................................................................................................................12
2.10. Information about the Touchpad ....................................................................13
2.11. Notes on the integrated batteries ..................................................................14
2.12. Measures for protecting the display ..............................................................15
3. Included with your Notebook ................................................................... 15
4. Views ........................................................................................................... 16
4.1. Open Notebook .....................................................................................................16
4.2. Left Side ....................................................................................................................17
4.3. Bottom View of the Tablet Unit ........................................................................18
4.4. Right Side .................................................................................................................18
5. About this device ....................................................................................... 19
5.1. Use in notebook mode .......................................................................................19
5.2. Use in tablet mode ...............................................................................................19
6. First Use ...................................................................................................... 19
7. Power Supply ............................................................................................. 21
7.1. On/Off Switch .........................................................................................................21
7.2. Mains Power ...........................................................................................................21
7.3. Battery Mode ..........................................................................................................23
7.4. Power Management (Power Options) ...........................................................25
7.5. Sleep Mode .............................................................................................................25
8. Display ........................................................................................................ 26
8.1. Opening and Closing the Display ...................................................................26
8.2. Touch screen ...........................................................................................................26
8.3. Screen Resolution .................................................................................................28
8.4. Appearance and Customisation ......................................................................29
8.5. Connecting an External Monitor .....................................................................30
2 of 66
9. Data Input ................................................................................................... 32
9.1. The Keyboard .........................................................................................................32
9.2. The Touchpad .........................................................................................................33
10. The Hard Drives .......................................................................................... 35
11. The Sound System ..................................................................................... 36
11.1. External Audio Connections .............................................................................36
12. Network Operation .................................................................................... 37
12.1. What is a Network? ..............................................................................................37
12.2. Wireless LAN (Wireless Network) ....................................................................37
12.3. Bluetooth .................................................................................................................38
12.4. Flight Mode .............................................................................................................38
13. The Card Reader ......................................................................................... 39
13.1. Inserting a Memory Card ...................................................................................39
14. The Universal Serial Bus Port ................................................................... 40
15. Securing Your Notebook ........................................................................... 40
15.1. Password Setting (Power-on) ...........................................................................40
16. Software ..................................................................................................... 41
16.1. Getting to Know Windows
®
8 ............................................................................41
16.2. Windows Activation .............................................................................................41
16.3. Windows
®
8 – Whats New .................................................................................42
16.4. Overview ..................................................................................................................44
16.5. Linking a User Account to a LiveID .................................................................46
16.6. Windows® 8 Start Screen ....................................................................................47
16.7. Windows® 8 Desktop ...........................................................................................48
16.8. Using the Search Function ................................................................................51
17. Control Panel .............................................................................................. 51
17.1. Windows
®
8 Power On/Off Functions ............................................................53
17.2. Control Panel Settings.........................................................................................53
17.3. Resetting the Notebook to its Factory Settings .........................................54
17.4. UEFI firmware configuration .............................................................................55
17.5. Windows
®
8 – Help and Support .....................................................................55
18. FAQ – Frequently Asked Questions .......................................................... 56
19. Customer Service ....................................................................................... 57
19.1. What To Do In Case of Hardware Problems ................................................57
19.2. Find The Cause ......................................................................................................57
19.3. Do You Need More Help? ...................................................................................58
19.4. Driver Support .......................................................................................................59
19.5. Transport ..................................................................................................................59
19.6. Maintenance ...........................................................................................................60
19.7. Upgrading/Modifying and Repair ..................................................................60
19.8. Notes for Service Technicians ...........................................................................61
3 of 66
20. Recycling and Disposal.............................................................................. 61
21. European EN 9241-307 Class II Standard ................................................. 62
22. Legal notice ................................................................................................ 64
23. Index ........................................................................................................... 65
4 of 66
Personal Information
Please append the following to your proof of ownership:
Serial number ................................................
Date of purchase ................................................
Place of purchase ................................................
You will find the serial number on the underside of the Notebook. Where applicable,
also copy the number on your warranty documents.
Our Target Group
This operating manual is intended to be read by both first-time and experienced
users. Regardless of any possible professional use, this Notebook is designed for use
in a private household. The entire family will be able to enjoy the wide variety of
applications it offers.
The Quality
We select our components with a close eye to functionality, ease of use, safety and
reliability. Thanks to our ideally balanced hardware/software concept we are able to
offer you a state-of-the-art Notebook that you will enjoy whether you are working
or at play. Thank you for purchasing our products. We are delighted to welcome you
as our new customer.
Trademarks: MS-DOS
®
and Windows
®
8 are registered trademarks of the Microsoft
®
corporation. Intel, the Intel Logo, Intel Inside, Intel Core, Notebook, and Core Inside
are trademarks of Intel Corporation in the U.S. and/or other countries.
®
, the HDMI logo and the name High-Definition Multimedia Interface are
registered trademarks of HDMI Licensing LLC.
Other trademarks are the property of their respective owners.
5 of 66
1. About these Instructions
Before using the device for the first time, please read these operating
instructions carefully, paying special attention to the safety notices.
This device should only be used as designated and as described in these
instructions.
Please keep these instructions in a safe place for future reference.
Always include these instructions if passing the device on.
1.1. Symbols and Key words used in these
Instructions
DANGER!
Warning of immediate risk of fatal injury!
WARNING!
Warning: possible mortal danger and/or serious
irreversible injuries!
CAUTION!
Warning: possible light or moderate injuries!
CAUTION!
Please follow the guidelines to avoid injuries and/or
property damage.
PLEASE NOTE!
Additional information on using the device
PLEASE NOTE!
Please follow the guidelines in the operating instructions.
WARNING!
Warning: danger of electric shock!
WARNING!
Warning: danger due to excessive volume!
Bullet point/information on operating steps and results
6 of 66
Tasks to be performed
1.2. Proper Use
This device is designed for the use, management and editing of electronic
documents and multimedia content, as well as for digital communication. The
device is intended for private use only and not for industrial/commercial use.
Please note that we shall not be liable in cases of improper use:
Do not modify the device without our consent and do not use any auxiliary
equipment which we have not approved or supplied.
Use only spare parts and accessories which we have supplied or approved.
Follow all the instructions in this instruction manual, especially the safety
information. Any other use is deemed improper and can cause personal injury or
damage to the product.
Do not use the device in extreme environmental conditions.
1.3. Declaration of Conformity
This product is supplied with the following wireless features:
Wireless LAN (optional)
• Bluetooth (optional)
Medion AG hereby declares that this product conforms to the following European
requirements:
R&TTE Directive 1999/5/EC
Ecodesign Directive 2009/125/EC
Full declarations of conformity are available at www.medion.com/conformity.
7 of 66
2. Safety Instructions
2.1. Dangers for children and people with reduced
ability to operate electronics
This device is not intended for use by people (including children)
with reduced physical, sensory or mental abilities or for those
without experience and/or knowledge, unless they are supervised
by a person responsible for their safety or they have been
instructed in its use.
Children should be supervised to ensure that they do not play
with the device. Children should not be allowed to use this device
without supervision.
Keep the device and its accessories out of the reach of children.
DANGER!
Keep plastic packaging out of the reach of children. There
is a risk of suffocation.
2.2. Operational Safety
Please read this section carefully and follow all instructions given. The
instructions will help you to operate the Notebook reliably and in-
crease its service life.
Never open the housing of the Notebook, battery or mains
adapter! This could result in an electric shock or even ignite a fire
which will damage your Notebook.
Do not insert anything into the Notebook through the slots and
openings. This could result in an electric shock or even ignite a fire
which will damage your Notebook.
The slots and openings on the Notebook are for ventilation
purposes. Do not cover these openings as this could cause the
device to overheat.
8 of 66
The Notebook is not intended for use by companies in the heavy
industry sector.
To avoid damage from lightning strikes, do not operate the
Notebook during thunderstorms.
Do not place any objects on top of the Notebook and do not exert
pressure on the display. Otherwise, there is a risk that the display
may break.
If the screen breaks, there is a danger of injury. If this happens, pick
up the shattered pieces wearing protective gloves and send them
to your service centre for professional disposal. Finally, wash your
hands with soap, as the pieces may have been contaminated with
chemicals.
Do not fold the display back by an angle of more than 120°.
Exceeding this value may damage the housing or the Notebook.
Always hold the display firmly by the middle when folding it back,
adjusting the position and closing it. Failure to do so may damage
the display. Never use force to open the display.
To avoid damaging the screen, do not touch it with sharp objects.
Never lift the laptop up by the display as this could break the
mounting fixtures and the connectors.
Place the tablet unit carefully and centrally in the mounting
fixtures on the base unit to avoid damage.
Should the below occur, switch the Notebook off immediately/
do not switch the Notebook on, disconnect the mains plug and
contact customer services if
the mains adapter or the attached power cable or plug is burnt
or damaged. Replace faulty mains cables/mains adaptors only
with original parts. These parts should not be repaired under
any circumstances.
the Notebook housing is damaged or liquid has penetrated into
the device. Have the Notebook inspected by customer services.
Otherwise, it may not be possible to operate the Notebook
safely. There may be a risk of electric shock and/or harmful laser
radiation!
9 of 66
If the notebook gets wet,
do not switch it on.
disconnect the power cable and switch off the notebook.
do not switch it back on until it has dried off completely.
2.3. Never Carry Out Repairs Yourself
WARNING!
Never try to open or repair the device yourself. There is a
risk of electric shock.
If there is a fault, contact the Medion Service Center or other
suitable specialist workshop.
2.4. Data Backup
CAUTION!
Back up your data on external storage media before
each update. We do not accept any liability for claims for
compensation arising from loss of data or any consequential
loss or damage.
2.5. Setup Location (in Notebook Mode)
Keep your Notebook and all connected devices away from
moisture and avoid dust, heat and direct sunlight. Non-compliance
with these instructions can lead to faults or damage to the
Notebook.
Do not use the Notebook outdoors because external elements,
such as rain, snow, etc., could damage it.
Set up and operate all components on a stable, level and vibration-
free surface to prevent the Notebook from falling down.
Do not operate the Notebook or power adaptor for long periods
on your lap or any other body part as the heat dissipation on the
underside can result in uncomfortable overheating.
In the first few hours of use new devices can give off a typical,
unavoidable but totally harmless smell, which wears off with time.
Ventilate the room regularly to prevent odour build-up.
This device is not suitable for use with VDU workstations.
10 of 66
2.6. Environmental Requirements
The Notebook is most reliably operated at an ambient temperature
between 5° C (+41° F) and 30° C (+86° F) and at a relative humidity
between 20% and 80% (without condensation).
When powered off, the Notebook can be stored at temperatures
between 0° C and 60° C (+32° F and 140° F).
During a thunderstorm, disconnect the mains plug and the
antenna plug. For extra safety, we recommend using an
overvoltage protection device to prevent the Notebook from
sustaining damage as a result of power surges or lightning strikes.
After transporting the Notebook, wait until the device has reached
room temperature before switching it on. Large changes in
temperature or fluctuations in humidity can cause moisture build-
up within the Notebook due to condensation. This can cause an
electrical short circuit.
Keep the original packaging in the event the device needs to be
sent in the post.
2.7. Ergonomics
PLEASE NOTE!
Avoid dazzle, reflections and strong bright-dark contrast in
order to protect your eyes.
The Notebook should never be placed next to a window because this is the
brightest part of the room in daylight. This brightness can make it more difficult for
the eyes to adjust to the darker display. The Notebook should always be positioned
so that the direction of vision is parallel to the window front.
Setting up the Notebook with your back to the window is incorrect as reflections
from the bright window on the screen will then be unavoidable. A position looking
onto the window is also incorrect as the contrast between the dark screen and the
bright daylight can cause problems for the eyes to adjust and result in problems.
The parallel line of vision should also be maintained in relation to artificial lighting
equipment.
In other words, the same criteria and principles apply where the workspace is
illuminated with artificial light. Where space restrictions make it impossible to set up
the screen as described, then correct positioning (rotating, tilting) of the Notebook/
screen can prevent dazzling, reflections and excessive bright-dark contrast, etc. In
many cases, an improvement can also be achieved by using slats or vertical blinds
on the windows, partition walls or by changing the artificial lighting equipment.
11 of 66
2.8. Connecting
Follow the instructions below to connect your Notebook correctly
and safely:
2.8.1. Power Supply
DANGER!
Do not open the housing of the mains adapter. There is a
risk of electric shock when the housing is open. It does not
contain any parts requiring maintenance.
The socket outlet must be close to the Notebook and easily
accessible.
To disconnect the power supply from your Notebook (via the
mains adaptor), pull the mains plug from the power outlet.
Plug the Notebook’s mains adapter into AC 100–240 V~, 50/60 Hz
earthed sockets only. If you are not sure about the power supply at
the set-up location, please ask your power supplier.
Use only the mains adapter and power cable supplied.
For extra safety, we recommend using an overvoltage protection
device to prevent your Notebook from sustaining damage as a
result of power surges or lightning strikes.
If you want to disconnect the adapter from the mains, pull the
connector out of the wall socket first and then out of the socket
on the Notebook. The mains adapter or the Notebook may be
damaged if this process is carried out in the reverse order. Always
take hold of the plug when disconnecting the cable from the
socket. Never pull on the cable.
12 of 66
CAUTION!
Use only the supplied mains adapter to charge your device.
WARNING!
Listening to a device at high volumes for an extended
period via headphones/earphones can damage your
hearing. Excessive volume when using headphones or
earphones can damage your hearing. Before pressing
play, set the volume to the lowest setting. Start playback
and increase the volume to a comfortable level. Changing
the basic settings of the equaliser can also increase the
volume and thus cause permanent damage to your
hearing. Changing the drivers, software, equaliser,
operating system, etc., can also lead to an increase in
the volume and thus cause permanent damage to your
hearing.
2.9. Cabling
Position the cables so that they cannot be stepped on or tripped
over.
To avoid damaging the cables, do not place any objects on them.
Do not connect peripheral devices – such as keyboards, mouse
and monitor, etc. – when the Notebook is switched on to avoid
damage to the Notebook or the devices. Some devices may also be
connected while the computer is running. This is generally the case
for devices with a USB connection. In all cases, observe the relevant
operating instructions.
Maintain a distance of at least one metre from sources of high-
frequency and magnetic interference (TV sets, loudspeakers,
mobile phones, DECT telephones, etc.) in order to avoid
malfunctions and data loss.
Please note that only shielded cables that are shorter than 3
metres may be connected to the external interfaces of this
Notebook. Please only use double-shielded cables for printer cable
connections.
13 of 66
Do not exchange the supplied cable for another one. Use only
the supplied cable as this cable has been extensively tested in our
laboratory.
In addition, when connecting your peripherals only use the
connecting cables supplied with those devices.
Ensure that all connection cables are connected to their
corresponding peripheral device to avoid any interference
radiation. Disconnect any cables that are not required.
The only devices which may be connected to the Notebook are
those that meet the requirements set out in the EN60950 standard
“Information Technology Equipment – Safety or devices that
meet the EN60065 standard Audio, video and similar electronic
apparatus – Safety requirements”.
Seuls les appareils conformes à la norme EN60950 « Sécurité pour
le matériel de traitement de l’information » ou à la norme EN60065
«Exigences de sécurité pour les appareils audio, vidéo et appareils
électroniques analogues » peuvent être raccordés à cet ordinateur
portable.
2.10. Information about the Touchpad
The touchpad is operated with the thumb or another finger and
reacts to the energy given out by the skin. Do not use pens or
other objects as these can damage your touchpad.
14 of 66
2.11. Notes on the integrated batteries
CAUTION!
Danger of explosion if batteries are incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the manufacturers
instructions. Never attempt to disassemble or reassemble.
Do not heat up above 60°C (140°F). Do not dispose of in
fire or directly short circuit.
This device contains two integrated batteries: One battery is in the
base unit, the second battery is in the tablet unit. To increase the
lifespan and performance of your batteries and also to ensure reliable
operation, you should also heed the following instructions:
Use only the supplied mains adaptor to charge the batteries. Make
sure (via the laptop display or acoustic signal) that the batteries are
fully discharged before charging them again.
Always charge the batteries until the battery charging light goes
out. Please also observe the information in Charging the batteries”
to assess the charge status of your batteries.
The batteries are built into the devices and should only be
removed by a qualified technician/the Service Centre.
15 of 66
2.12. Measures for protecting the display
The display is the most sensitive component part of the notebook
as it consists of thin glass. It can break if subjected to too much
stress. Do not scratch the cover of the notebook, because it will not
be possible to remove any scratches.
Avoid contact between the display and hard objects (e.g. buttons,
wristwatch).
Do not place any objects on the display.
Do not allow any objects to drop onto the display.
Do not pour any fluids into the notebook, as this could damage it.
Do not scratch the display with your fingernails or hard objects.
Do not clean the display with chemical cleaning products.
Clean the display with a soft, dry and lint-free cloth.
PLEASE NOTE!
The surfaces of the device are covered in protective film to prevent
scratching during production and transport.
Remove the film once the device has been set up properly and before
you use it.
3. Included with your Notebook
Please check that the contents are complete and notify us within 7 days of purchase
if any of the following components are missing:
• Notebook
AC Adapter with Power Cord
OEM version of operating system
• Documentation
DANGER!
Keep packaging material such as plastic film away from
children. There is a risk of suffocation if used improperly!
16 of 66
4. Views
4.1. Open Notebook
2
4
6
7
8
9
5
3
10
1
1) Microphone
2) Webcam
3) Webcam LED
4) LCD Display
5) Windows Button
6) Keyboard
7) Touchpad
8) Unlocking the display
9) Battery LED
10) Light Sensor
17 of 66
4.2. Left Side
14
15
16
17 18
20
21
22
12
13
11
19
11) Reset opening for the tablet unit
12) USB 3.0 Port
13) USB 2.0 Port
14) microHDMI Connector
15) microSD Card Slot
16) Audio Out / Microphone
17) Volume Buttons +/-
18) Power ON/OFF
19) Reset opening for the base unit
20) USB 2.0 Port
21) USB 2.0 Port
22) Power Socket
PLEASE NOTE!
If your device stops working properly, insert the point of a straightened
paper clip into the reset opening. The device will be reset. No data will
be deleted.
18 of 66
4.3. Bottom View of the Tablet Unit
24
23
23) Power Socket
24) Connection plug to the base unit
4.4. Right Side
25
25) Slot for 3G Card (card is not supplied, available soon in retail outlets and the
Medionshop)
PLEASE NOTE!
You can find out more on our website www.medion.com.
19 of 66
5. About this device
Thanks to its removable display, this device is designed for use in notebook mode as
well as tablet mode.
5.1. Use in notebook mode
A simple connection to the base unit turn the tablet unit into a notebook.
Hold the tablet unit firmly with both hands and place it onto the mounting
fixtures on the base unit until it audibly clicks into place.
ATTENTION !
Place the tablet unit carefully and centrally in the mounting
fixtures on the base unit to avoid damage.
5.2. Use in tablet mode
Slide the display release (8) to the left and, at the same time, carefully lift the
tablet unit out of the mounting fixtures on the base unit.
6. First Use
To operate your Notebook safety and ensure a long service life, you should read the
“Operational safety chapter at the beginning of this manual. All operating software
is already fully preinstalled on the Notebook so there is no need for you to install
any more drivers and you can get started right away.
Connect the supplied mains adapter to the base unit (22). Next, connect the
power cable to the adapter and then plug it into a mains socket.
REMARQUE !
Alternatively, you can connect the mains adapter to the mains adapter
connection on the underside of the tablet unit (23), if you only plan to
work with the tablet unit.
20 of 66
Open up the display to the desired position using your thumb and forefinger.
The display should not be folded back by more than 120°. Always hold the
display firmly by the middle when folding it back, adjusting the position and
closing it. Failure to do so may damage the display. Never use force to open the
display.
PLEASE NOTE!
When first operating your Notebook please ensure that the mains
adapter is connected. This is required for Windows® 8 to correctly work
out the Windows® 8 performance index.
Switch the Notebook on by pressing the on/off switch (18). The Notebook will
now start and run through various steps.
PLEASE NOTE!
There should be no bootable disk (e.g. the recovery disc) in the optical
drive as this will prevent the operating system from being loaded from
the hard drive.
The operating system will be loaded from the hard drive. The loading process takes
a little longer during the initial setup. Once all the necessary data has been entered,
the operating system will be set up. The operating system is fully loaded once the
Windows
®
8 start-up screen appears.
PLEASE NOTE!
The initial installation may take a few minutes. Do not unplug the
Notebook from the mains or switch it off during the initial installation.
This may adversely affect the installation. Do not switch off the
Notebook until after the installation has been completed successfully
and the startup screen appears.
21 of 66
7. Power Supply
7.1. On/Off Switch
Open the Notebook and hold the on/off switch down briefly to switch the
Notebook on or off.
Regardless of the operating system, the Notebook will switch off if the switch is held
down for longer than 4 seconds continuously.
CAUTION!
Do not switch your Notebook off while the hard drive or optical
drive is being accessed. Otherwise data may be lost. To protect
the hard drive, you should always wait for 5 seconds after
switching off the Notebook before switching it back on again.
7.2. Mains Power
Your Notebook comes with a universal mains adapter for alternating current which
automatically adapts to the available power source. The following values are
supported: AC 100–240 V~/50–60Hz. Observe the safety information concerning
the power supply. The adapter is connected to an AC outlet via a mains cable.
The DC power cable of the mains adapter is connected to the left side of the
notebook (22) or the underside of the tablet unit (23).
The adapter supplies the Notebook with power and also charges the battery. The
operating lights on the Notebook provide information about the operating mode.
Your battery will also be charged while you work on your Notebook with the mains
adapter connected. The mains adapter also consumes power when the Notebook
is not connected to it. You should therefore always remove the mains adapter plug
from the socket when it is not connected to the Notebook.
CAUTION!
Use only the mains adapter and power cable supplied.
22 of 66
7.2.1. Starting the Notebook
Open up the display as described above and press the on/off switch.
Follow the instructions on the screen. Step-by-step instructions will guide you
through the process to be followed.
The welcome procedure takes you through several screens and dialogues.
Select your desired language and then the corresponding country settings.
Licence Agreement
Please read through the licence agreement carefully. It provides important legal
information about the use of your software product. To view the text in full, you
must slide the scroll bar downwards using the mouse until you reach the end of
the document. You accept the licence agreement by checking the I accept the
agreement radio button. Only this entitles you to use the product in accordance
with the terms and conditions.
After entering a computer name you can connect your Notebook to the Internet
immediately on the Wireless page (if you already have an appropriate Internet
connection set up).
If you choose to skip this point, you can connect to the Internet later via the
Windows
®
8 interface.
If you have already set up an Internet connection, you can now log in to your
Notebook using a Microsoft account.
The Microsoft Store allows you to purchase new apps or update previously installed
apps.
If you log in on a local account, you can set up a Microsoft account later at any time.
The following animated windows simply contain information about using the new
Windows
®
8 operating system.
No entries of any kind may be made during the animation.
The Windows
®
8 interface appears after the login process.
PLEASE NOTE!
In the first few days following the initial installation, Windows® 8 may
update and configure data (e.g. with new updates) which can result in
delays in the Notebook shutting down and starting up. For this reason,
do not switch the Notebook off prematurely. This may adversely affect
the installation.
23 of 66
7.3. Battery Mode
PLEASE NOTE!
Please charge and discharge the new batteries completely two or
three times consecutively to ensure that it reaches their optimum
performance! Batteries store electrical energy in their cells and then
release it again as required.
The service life and performance of your batteries depend on careful handling.
The batteries should always be completely discharged before charging and then
fully charged again to optimise the service life and performance.
Please also take note of the safety instructions on „Safety Instructions“.
7.3.1. Charging the Batteries
The batteries are charged using the mains adapter. When the mains adapter is
connected and switched on, the batteries charge automatically regardless of
whether or not the Notebook is switched on or not. A complete charge takes a
few hours with the Notebook switched off. With the Notebook switched on, the
charging process takes significantly longer.
PLEASE NOTE!
The charging process is interrupted if the battery voltage or
temperature gets too high.
7.3.2. Behaviour of the battery charge status display
If the device is being operated in notebook mode, the charging status of both
batteries will be shown and not two separate charge statuses.
If, for example, the battery in the base unit is empty but the battery in the tablet
unit is full, a charging status of 50% will be shown.
If the device is being used in tablet mode, i.e. without the base unit, a charging
status of 100% is shown.
PLEASE NOTE!
The battery in the tablet unit is always charged first.
The battery in the base unit is then also charged when the display unit is
removed and the mains adapter connected to the base unit. If the mains
adapter is not connected, the battery in the tablet unit will charged
from the battery in the base unit. This ensure that the tablet mode is
optimised.
24 of 66
7.3.3. Discharging the battery
Operate the notebook on battery power until it turns itself off due to low battery
charge.
PLEASE NOTE!
Be sure to save your open files promptly to prevent any data loss.
7.3.4. Battery Performance
The actual operating time varies depending on the configuration of the power-
saving functions. You can configure these to suit your requirements in the
Control Panel under System and Security, Power Options. Note: your Notebook
consumes more power when running certain applications.
7.3.5. Checking the Battery Charge
To check the current battery charge status, move the cursor over the power icon in
the task bar. In battery mode, the icon is displayed as a battery.
You can obtain more information about settings by double-clicking the icon.
PLEASE NOTE!
If you ignore the low battery warning, your Notebook will shut down.
25 of 66
7.4. Power Management (Power Options)
Your Notebook offers automatic and customisable power-saving and energy
functions that can be used to optimise battery life and reduce the overall operating
costs.
7.4.1. Power Management Settings
Follow the instructions below to adjust the power management settings:
Drag the mouse cursor to the left corner of the screen and Start icon will show
up.
Right click on the icon to show selection menu. Select Control Panel in the
menu.
Click on System and Security.
Then click on Power Options.
Select a power plan that meets your personal needs.
The Power icon will present various and relative options:
You can wake up your computer from power saving mode by pressing the
On/Off button.
7.5. Sleep Mode
With this setting the content of your Notebooks RAM is preserved while practically
all other components of your Notebook are disabled or their power consumption
reduced to a minimum. If the notebook is flipped shut it will enter sleep mode. The
notebook will automatically come out of sleep mode upon reopening.
PLEASE NOTE!
Changes can be made to the sleep settings at any time in the power
options.
26 of 66
7.5.1. Energy Saving Tips
• Utilize the Fn and F1 sleep mode keys to turn into power saving mode.
Tune the settings in Power Options to optimize the computers power
management.
Always disconnect the AC power cord or uninstall the battery pack or switch off
the wall socket if the computer would be left unused for a certain time to
achieve zero energy consumption.
The power management feature allows the computer to initiate a lower-power or
“Sleep mode after a period of user inactivity.
To take advantage of these potential energy savings, the power management
feature has been preset to behave in the following ways when the system is
operating on AC power:
Turn off the display after 5 minutes
Initiate Sleep after 10 minutes
The notebok exits Sleep when the On/Off button /Sleep button is pressed.
8. Display
8.1. Opening and Closing the Display
The special design of the display hinges keeps the display closed without the need
for an additional catch.
To open the Notebook, fold the display up to the desired position using your
thumb and forefinger.
CAUTION!
Do not fold the display back by an angle of more than 120°.
Always hold the display firmly by the middle when folding it
back, adjusting the position and closing it. Failure to do so may
damage the display. Never use force to open the display.
Opening and closing the display can be assigned different functions in the power
options.
8.2. Touch screen
Your notebook is supplied with a touch-sensitive screen. Please follow the
instructions below in order to optimise its use:
8.2.1. Operation
Do not touch the screen with sharp or pointed objects as these
may damage the screen.
Only touch the screen with a blunt implement or with your finger.
27 of 66
8.2.2. Touch screen gestures
These are the main gestures which allow you to run programs and access settings
on your notebook:
Diagram Command
Swipe from the left
edge towards the
centre
Swipe from the left
edge towards the
centre and back
Swipe from the left edge
towards the centre of the
screen to display the last app
Swipe from the left edge of
the screen to the centre of the
screen and back to the left
edge again without letting go
to display all the apps which
are open
Swipe from the right
edge
Swipe from the right edge of
the screen to the centre of the
screen to open the Charms
bar
Zoom out
Bring two fingers together on
the touch screen
Zoom in
Spread two fingers apart on
the touch screen
Swipe down from the
top edge
Swipe down from the top
edge of the Start screen to
display the All Apps bar
If you swipe down from the
top edge of the screen in an
open application then the
menu for the application will
be displayed
Swipe in all directions
You can move the screen up
and down and to the left and
right with one finger
28 of 66
Diagram Command
Hold down
Press an app tile and hold it
down to move the app to a
new location
Press the top edge of an open
app and hold it down to close
it and drag the app to the
bottom edge of the screen
Tap / double-tap
Tap on the required app to
open it
Double-tap in desktop mode
to open an application
8.3. Screen Resolution
The integrated monitor can display up to 1920 x 1080 pixels. If you change to a
display with different settings in the Windows® 8 Control Panel, Appearence and
Personalisation wizard, the display may not, in certain circumstances, fill the entire
screen area. Distortions can also occur, especially for fonts, when enlarging. You
can work with a higher resolution, however, if you connect an external monitor
with a higher resolution. The Windows® 8 Control Panel, Appearence and
Personalisation wizard allows you to adjust the display to the modes supported.
29 of 66
8.4. Appearance and Customisation
This program gives you the option of customising your desktop. This includes the
background image, the screensaver and other settings for your monitor and your
graphics card. The program can be started as follows:
Right-click on the Windows desktop and left-click on Personalise
.
or
• Via Settings, Personalisation, Display by double clicking with the left mouse
button.
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Then click Personalisation.
First select the Display option from the dialogue box.
The following settings options are available:
Set resolution
Set brightness
Calibrate colour
Change display settings
Display on second monitor
Customise ClearType text
30 of 66
8.5. Connecting an External Monitor
The Notebook has a microHDMI port (13) for an external monitor.
Shut down your Notebook correctly.
Plug the external monitors signal cable into the digital microHDMI connection
(High Definition Multimedia Interface) to transmit picture and sound signals.
Connect the external monitor to the mains and switch it on.
Now switch your Notebook on.
Once the operating system has loaded, the external monitor will be detected. A
number of options are available. You can access these as follows:
Run the Desktop App.
Move the mouse pointer into the top right or bottom corner of the display and
click
Settings.
Then click Personalisation.
In the dialogue box, first select the Display option and then Project to a second
screen.
Press the + P buttons at the same time to open this menu quicker.
Under Project to a second screen choose from the following options:
PC screen only
Duplicate
Extend
Second screen only
31 of 66
8.5.1. Duplicate
This mode duplicates the Notebook display on the external monitor.
PLEASE NOTE!
In this mode the same screen resolution must be configured for both
devices.
8.5.2. Extend
In this mode, a blank desktop is displayed on the second (external) monitor.
Windows on the first screen can be moved onto the second screen and vice versa.
The screen resolution and colour quality can be configured individually for each of
the display devices under Settings, Personalisation, Display.
8.5.3. PC Screen Only
The desktop will only be shown on main monitor 1.
8.5.4. Second Screen Only
The desktop will only be shown on the second (external) monitor.
32 of 66
9. Data Input
9.1. The Keyboard
The double assignment of certain keys means that the range of functions available
to you is the same as on a conventional Windows keyboard. Some functions are
entered using the FN key (standard on most Notebooks).
9.1.1. Notebook-Specific Keyboard Shortcuts
Description
Fn + F1
Sleep
To configure these keys to suit your requirements, please go to
Power Options.
Fn + F2
Internet-Explorer
Starts the Internet-Explorer.
Fn + F4
Mute
Switches the sound on or off.
Fn + F5
Quieter
Decreases the playback volume.
Fn + F6
Louder
Increases the playback volume.
Fn + F7
Darker
Reduces the brightness of the display.
Fn + F8
Brighter
Increases the brightness of the display.
Fn + F9
Touchpad
Switches the touchpad on and off.
Fn + F10
Flight mode
Opens the user interface for switching the WLAN and/or
Bluetooth function on or off.
Fn + F11
Webcam
Enables or disables the webcam.
33 of 66
9.2. The Touchpad
In normal mode, the cursor follows the direction specified by moving your fingers in
the corresponding direction on the touchpad.
CAUTION!
Do not use pens or other objects as this can damage your
touchpad.
The left and right mouse buttons are found in the lower section of the touchpad
and can be used in the same way as those on a conventional mouse.
You can also perform a click or a double-click on the touchpad directly by tapping
the touchpad surface once or twice briefly.
In the Windows
®
8 control panel, under the Mouse item, you will find a number of
useful settings to simply your day-to-day tasks.
34 of 66
9.2.1. Two-Finger Touchpad Operation
Your touchpad supports two-finger operation which enables certain commands to
be executed in some applications.
You can perform the following commands using your touchpad:
Image Command Function
Drag two fingers
together or apart
zoom out
from an object/
zoom in on an object
Place one finger in the
centre and trace a circle
with the second finger
Rotate an object anti-
clockwise
Swipe from left to
right/from right to
left with two fingers
simultaneously
Page forward/
page back
Swipe down or up
with two fingers
simultaneously
Scroll function This
function is used in most
applications to scroll up
and down the screen
without having to move
the cursor.
Swipe from top to
bottom on the touchpad
Opens the context menu
on the start screen and the
top and bottom tabs in
Internet Explorer
Swipe from the far right
across the touchpad
Opens the menu bar
Swipe from the far left
across the touchpad
Scrolls through all open
windows
35 of 66
10. The Hard Drives
The hard drive is your main memory medium and combines high storage capacity
with rapid data access. The base unit includes an HDD; the tablet unit is equipped
with a 64GB eMMC hard drive.
Your Notebook is supplied with an OEM version
*
* of the Microsoft Windows
®
8
operating system which supports all of the Notebooks performance features. We
have configured your Notebook’s hard drive so that you will be able to work with it
optimally without having to install any additional drivers yourself. The Windows
®
8
operating system requires part of the capacity to manage the hard drive therefore
the hard drives full capacity is not available. This explains any differences between
the UEFI firmware configuration and the operating system display. The Notebook’s
operating system, other applications and security data are located on the hard drive
meaning that the full capacity is already reduced.
There are also drivers and utility programs for your notebook saved on the hard
disks.
CAUTION!
To avoid data loss, close all open documents/media files that
are on the hard drive of the base unit before disconnecting the
display from the device.
CAUTION!
The startup files for system restoration „Resetting the Notebook
to its Factory Settings“ and the Windows
®
8 installation files are
located in non-rewritable partitions. These partitions cannot
be deleted.
**
Original equipment manufacturer/program versions purchased from the manufacturer which are usual-
ly sold in conjunction with end devices
36 of 66
11. The Sound System
11.1. External Audio Connections
Your Notebook has an integrated stereo speaker so you can always reproduce
sound without additional devices. Using the external connections provides you
with an ideal opportunity to connect your Notebook to external devices.
The Fn + F5 and Fn + F6 keyboard shortcut enables you to adjust the volume.
WARNING!
Listening to a device at high volumes for an extended
period via headphones/earphones can damage your
hearing. Excessive volume when using headphones or
earphones can damage your hearing. Before pressing
play, set the volume to the lowest setting. Start playback
and increase the volume to a comfortable level. Changing
the basic settings of the equaliser can also increase the
volume and thus cause permanent damage to your
hearing. Changing the drivers, software, equaliser,
operating system, etc., can also lead to an increase in
the volume and thus cause permanent damage to your
hearing.
Audio output /microphone
(16)
For sound playback via external stereo devices
such as (active) speakers or headphones. For
recording via an external microphone.
37 of 66
12. Network Operation
12.1. What is a Network?
We talk about a network when multiple computers are directly connected to one
another. This allows users to transfer information and data with one another and to
share their resources (printers and drives).
Here are a few concrete examples:
In an office, messages are exchanged by e-mail and appointments are managed
centrally.
Users share one printer on the network and back up their data to a central
computer (server).
Two or more computers are connected to one another to play network games or
exchange data.
12.2. Wireless LAN (Wireless Network)
Wireless LAN is an optional feature. This function enables you to establish a network
connection to a corresponding remote station. Please read about the necessary
requirements.
The wireless LAN function is enabled and disabled via the Windows
®
8 menu and is
activated by default.
CAUTION!
Do not operate the WLAN function in locations (e.g.: hospitals,
planes, etc.) where there is sensitive equipment. Do not switch
the device unless you are sure it will cause no interference.
12.2.1. Requirements
A so-called WLAN access point may be used as a remote station. A WLAN access
point is a radio transmitting device that communicates with your Notebook and
controls access to the connected network.
WLAN access points are frequently found in large offices, airports, train stations,
universities or Internet cafés. They provide access to particular services and
networks or to the Internet.
Access permissions are generally necessary and often result in usage charges.
Access points often have built-in DSL modems. These so-called routers establish the
connection to the existing DSL Internet connection and the wireless LAN.
A connection can also be established to another end device with wireless LAN
functionality without an access point. Without a router, however, the network is
restricted to those devices directly connected to it.
The wireless network connection works in accordance with the IEEE 802.11n
or the
IEEE 802.11ac stanard.
38 of 66
If encryption is used for the transfer, the same procedure must be used for all
devices. Encryption is a procedure to protect the network from unauthorised access.
The transfer speed can vary depending on the distance and the number of users
accessing the remote station.
12.3. Bluetooth
Bluetooth technology is used to wirelessly bridge short distances. Bluetooth devices
transfer data via radio so that computers, mobile phones, printers, keyboards, mice
and other devices can communicate with one another wirelessly. Bluetooth wireless
technology has numerous possible applications. A few of them are listed below:
Creating a wireless Internet connection using a mobile phone.
Transferring files between computers or between a computer and another
device.
Printing using a Bluetooth printer.
Using a Bluetooth keyboard and mouse.
Connecting to a PAN (Personal Area Network).
Synchronising a personal digital assistant (PDA) with a computer or other device
that uses Bluetooth.
The Bluetooth wireless technology data transfer speed can vary depending on
the device or environmental factors. Data can be transferred through walls, jacket
pockets and briefcases using a Bluetooth device. The transfer between Bluetooth
devices occurs at the high frequency of 2.4 Gigahertz (GHz). For Bluetooth high
speed data transfer, WLAN must be enabled and the partner station must also
support the high speed mode.
CAUTION!
Do not operate the Bluetooth function in locations (e.g.:
hospitals, aeroplanes, etc.) where there is sensitive equipment.
Do not switch the device unless you are sure it will cause no
interference.
12.4. Flight Mode
In flight mode, all wireless connections (e.g. WLAN, Bluetooth) are disabled. Flight
mode is disabled by default to ensure that all wireless connections are available.
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Next, click Change PC settings.
Click Wireless.
Now enable or disable Flight mode here. Alternatively, use the Fn +
keyboard shortcut to open flight mode.
Once flight mode is enabled, a small aeroplane is displayed in the traditional
desktop task bar. You can also enable/disable flight mode by clicking this icon.
39 of 66
13. The Card Reader
Memory cards are media that are used, e.g. in the field of digital photography, and
are gradually replacing the diskette. The shape and capacity of a memory card
can vary depending on the manufacturer. Your Notebook supports the following
formats:
microSD (Secure Digital), microSDHC, microSDXC
13.1. Inserting a Memory Card
Insert the microSD into the card slot (15) on the tablet unit as shown below.
PLEASE NOTE!
The memory cards can only be inserted in one direction. Ensure that the
contacts of the microSD card are facing away from the display. Do not
use force to push in cards as this may damage them.
13.1.1. Removing Memory Cards
To remove SD cards, first push these into the socket to release the safety catch.
Now pull the card out of the slot and store it properly.
40 of 66
14. The Universal Serial Bus Port
The universal serial bus (USB 1.1 and USB 2.0) is a standard for connecting input
devices, scanners and other peripherals. Up to 127 devices can be connected to the
USB ports via a single cable.
The USB 3.0 ports are fully backwards compatible with USB 2.0 and 1.1.
Your Notebook has the following conections:
Base unit 2 x USB 2.0 (20 and 21)
Tablet unit 1 x USB 2.0 (13) and 1 x USB 3.0 (12)
PLEASE NOTE!
Where possible, always connect your USB devices to the same port that
they were originally installed on. Otherwise they will be assigned a new
ID and the drivers will need to be reinstalled.
15. Securing Your Notebook
Your new Notebook has software and hardware solutions for preventing
unauthorised access.
15.1. Password Setting (Power-on)
You can protect your Notebook against unauthorised use with a power-on
password. On switching on the Notebook, a password prompt will appear on the
screen. The password is set up in the UEFI firmware configuration.
CAUTION!
Keep your password in a safe place. If you forget your
password, you have no way of deleting it. If this happens,
contact your service centre.
You can also use the Windows
®
8 security options to protect your data against
unauthorised access.
41 of 66
16. Software
This section deals with the subject of software. We distinguish here between the
operating system, the software (the applications), the Windows activation and
the UEFI firmware configuration.
PLEASE NOTE!
The current Windows family currently includes Windows 8 and Windows
8.1. Windows 8.1 is the first update of the Windows 8 generation.
16.1. Getting to Know Windows
®
8
Windows
®
8, the new operating system from Microsoft, contains a series of
innovative functions and new technologies that your Notebook uses to work
quickly and reliably. At the same time, it is also designed to be easy to use.
16.2. Windows Activation
To protect against software piracy, Microsoft has introduced product activation. The
Windows
®
8 version installed on your Notebook and supplied with the Notebook
must be activated to enable you to use of all Windows
®
8 functions.
To do this, you require simply an Internet connection. The activation process is fully
automatic; no personal data will be transmitted.
If no Internet connection is available, select telephone activation as follows:
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Next, click Change PC settings.
Select the Activate Windows item.
Now click Activate by phone.
Click Next after choosing your country.
Call one of the specified hotlines on the telephone and read out the column of
figures displayed when prompted to do so.
You will then be given a confirmation ID over the telephone.
Enter this in the empty field and click Activate.
PLEASE NOTE!
If you have not activated Windows® 8, not all functions will be available
to you under PC settings. A watermark will also continue to be displayed
at the bottom right on the traditional desktop.
42 of 66
16.3. Windows
®
8 – Whats New
16.3.1. Microsoft Account
A Microsoft account is an e-mail address and password for logging in to Windows
®
8. You can use any e-mail address. We recommend using the address you use to
communicate with friends and log into your favourite web sites, however.
The Microsoft account also allows you to purchase or download apps from the Store
and install them on up to five devices.
Once you have logged on to your Notebook using a Microsoft account, you also
have access to the various services and programs provided by Microsoft.
The contact information and status updates for your friends from services such
as Hotmail, Facebook, Twitter and LinkedIn will be updated automatically as
soon as you run these services using your Microsoft account.
You can also access and share your photos, documents and other files via
SkyDrive, Facebook and Flickr.
Your personal settings, including designs, language settings, Internet favourites
and apps will be synchronised with each PC running Windows
®
8 that you log on
to.
You can obtain Apps from the Windows
®
8 Store. You can use these on any PC
running Windows
®
8 that you log on to.
If you wish to create a Microsoft account in Windows
®
8, proceed as follows:
Move the mouse pointer into the top right or bottom corner of the screen and
click Settings.
Click Change PC settings. > Users > Switch to a Microsoft account.
43 of 66
16.3.2. Taskbar (Desktop Mode)
You can start programs from the taskbar at the bottom of the screen and switch
between programs already running. In Windows® 8 you can place any program
onto the taskbar, so that you can always open it with a single click. You can also
rearrange the icons on the taskbar by simply clicking on them and dragging them
to the desired position. Move the mouse pointer over the icons and thumbnails of
each file or each open window and that program will be displayed. If you move the
mouse pointer over the thumbnail, a full screen preview of the window in question
appears. When you move the mouse pointer away from the thumbnail again, the
full screen preview closes.
16.3.3. Jump Lists
Jump lists offer a practical way of calling up recently opened files. To display the
recently used files, simply right-click on the application icon in the taskbar. Thus if
you right-click on the Word icon, the recently used Word documents are displayed.
You can also easily place other files you wish to have easily to hand in the jump list
so that they are always displayed. This allows you to access documents that you use
frequently in just a few mouse clicks.
The jump lists for certain programs such as Windows
®
8 Media Player can be
populated in advance with frequently used commands. Thus, for example, you
will see options to play all music or to reopen the last playlist in the jump list for
Windows
®
8 Media Player.
The frequently visited and last visited websites are displayed in the jump list for
Internet Explorer. This therefore allows you to quickly access commands for certain
programs that could previously only be called up from the program itself, such as
the command to compose a new e-mail message.
16.3.4. Improved Desktop
Windows
®
8 simplifies working with windows on the desktop. You therefore have
more intuitive options for opening and closing, changing sizes and rearranging.
Windows
®
8 makes completing everyday tasks even simpler. The locking function
(snaps) makes it easier to compare two open windows, for example. You do not
need to manually adjust the size of the opened windows to make a comparison.
Simply drag the window to one of the screen margins using the mouse and it will fill
half of the screen.
Click the window’s title bar, “shake it and all other opened windows are displayed
as icons on the task bar. “Shake” the window once more and the other windows are
displayed again.
44 of 66
16.3.5. Improved Device Management
Windows
®
8 allows you to connect, manage and use all devices via the central
“Devices” function.
All devices are shown in a central location.
With the new “Device Stage” technology, however, Windows® 8 goes one step
further with device management. Device Stage helps you to use all compatible
devices that are connected to the computer. Thanks to Device Stage you can now
display the device status and perform frequently used commands within a single
window. Here you will even find images of the devices so you can easily see which
devices are connected. The device manufacturers can even adjust Device Stage. For
example, if your camera manufacturer releases an updated version of Device Stage,
you can see details such as the number of photos on the camera and get links to
useful information when you connect the camera to your Notebook.
16.3.6. Home Group
With home network groups, a Windows
®
8 function, connecting home computers
becomes child’s play. A home network group is set up automatically when you
connect the first PC running Windows
®
8 to the home network. Adding additional
PC’s running Windows
®
8 to the home network group can be done very quickly.
You can specify precisely what should be shared on each PC with all other PCs in
the home network group. Sharing files on the various home PCs – and on many
other devices – is then as easy as if all the data were located on a single hard drive.
Thus, you can save digital photos on the computer in the study and then access
them easily on a Notebook in any other room. Similarly, the printer in the study is
automatically shared among all PCs in the house once they are part of the home
network group.
16.4. Overview
The greatest innovation with Windows
®
8 is the Start screen.
This key element replaces the Start menu in Windows
®
8.
Here you can run all the main programs and services.
As with previous versions, operation is by inputting commands using the mouse or
keyboard.
The Start screen can be opened at any time using the (Win) key. This key
also allows you to switch back and forth between the Start screen and an active
application. To switch to an application other than the last one opened, press the
Win+Tab keyboard shortcut.
A central feature of the Start screen are the tiles which each represent an
application or function. They are shown in blocks and you can define the number of
blocks and their columns yourself.
Drag & drop the tiles to the desired position using the mouse.
45 of 66
16.4.1. Logging in to Windows
To be able to work with Windows
®
8, you must set up a Windows
®
8 user account.
Move the mouse pointer into the top right or bottom corner of the display,
move the mouse down and click Settings.
Next, select Change PC settings.
Open the User category.
Select Add a user, to set up additional user accounts.
Windows
®
8 allows you to log in using 3 different login procedures. Windows
®
8
gives you the choice of standard login by password, a PIN or an image code. To set
up a PIN or image code, you must first have set up a password for Windows
®
8.
16.4.2. Setting up a Password for Windows
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Next, click Change PC settings.
Select the User item.
Click Change your Password and follow the instructions.
16.4.3. Setting a PIN for Windows
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Next, click Change PC settings.
Select the User item.
Click Create a PIN and follow the instructions.
16.4.4. Setting Up an ImageCode for Windows
Move the mouse pointer into the top right or bottom corner of the display and
click Settings.
Next, click Change PC settings.
Select the User item.
Click Create a Picture password and follow the instructions.
PLEASE NOTE!
The image code login has been specially designed for touch screen
devices. In devices without a touch screen, use the mouse instead of
finger movements or gestures. To be able to use all Microsoft services
you need to log in using a Microsoft account.
46 of 66
16.5. Linking a User Account to a LiveID
You can link your user account to a LiveID. This enables you to log in to any
computer or mobile device connected to the Internet using your LiveID.
Move the mouse pointer into the top right or bottom corner of the display,
move the mouse down and click
Settings.
Next, select Change PC settings.
Open the User category.
Select Switch to a Microsoft account.
Now enter your Windows Live ID e-mail address.
If you have not yet created a Windows Live ID account or added an e-mail
address to your Windows Live ID account, you can create and edit your Windows
Live ID account at http://www.windowslive.com/.
Follow the instructions on the screen to complete the link.
47 of 66
16.6. Windows® 8 Start Screen
Once the operating system is running, you will see the new Windows® 8 Start
screen.
(image similar)
Information such as the following may be displayed here, for example:
Windows
®
8
App
Windows
®
8 apps are executable programs.
The “Desktop” tile opens the traditional
Windows display.
The Internet Explorer tile launches Internet
Explorer
PLEASE NOTE!
Apps are applications that are displayed on a desktop with a program
thumbnail. The app thumbnails are bigger than the standard tiles.
48 of 66
16.7. Windows® 8 Desktop
This image shows a symbolic representation of additional programs.
(image similar)
Information such as the following may be displayed here, for example:
Classic
desktop
apps
Desktop apps are applications that are displayed on a
desktop with a program thumbnail. The app thumbnails
are bigger than the standard tiles.
The classic “Power Recover desktop app launches the
system recovery program.
The classic “Microsoft Office” desktop app launches the
Microsoft Office program.
Windows
®
8 apps from third-party suppliers are displayed as follows.
Example:
Windows
®
8
apps from
third-party
suppliers
These Windows
®
8 apps are executable
programs from third-party suppliers.
This Windows
®
8 app launches the “PowerDVD
program.
This Windows
®
8 app launches the “YouCam”
program.
49 of 66
16.7.1. Working with Windows
®
8 and Cassic Apps
Menu Instructions
Opening an app Click the desired app with the left mouse
button.
Closing an app
PLEASE NOTE!
Not all apps need to be closed!
Windows® 8 closes unused apps
automatically.
Press the Alt+F4 keyboard shortcut.
Click on the top edge of the running app and
drag the app down to the edge of the display.
Displaying all apps Right-click on the Start screen.
Click All Apps in the bottom right-hand
corner of the display.
Linking apps
to the Start screen
Right-click on the Start screen.
Click All Apps in the bottom right hand
corner of the display.
Right-click on the desired app to highlight it.
Click Pin to Start in the bottom left-hand
corner of the display.
Linking apps to the taskbar Right-click on the Start screen.
Click All Apps in the bottom right-hand
corner of the display.
Right-click on the desired app to highlight it.
Click Pin to Taskbar in the bottom left-hand
corner of the display.
Installing an app Run the Store app.
Search for the desired app and click Install.
The app will now be downloaded and
installed in the background.
50 of 66
Uninstalling an app Right-click on the Start screen.
Click All Apps in the bottom right hand
corner of the display.
Right-click the desired app.
Click Uninstall at the bottom edge of the
display.
PLEASE NOTE!
Not all apps can be uninstalled. If the
Uninstall option is not displayed, this
app can not be uninstalled.
Running apps as administrator
(Only possible with desktop
apps)
Right-click the desired app.
Now click Run as administrator on the
bottom edge of the display.
Running an app in a new
window
(Only possible with desktop
apps)
Right-click the desired app.
Click Open new window at the bottom edge
of the display.
Searching for apps Move the mouse pointer into the top right-
hand corner of the display, move the mouse
down and click Search.
Enter the name of the app.
Arranging apps Click and hold the left mouse button down
on the desired app and drag it to the desired
position.
Selecting multiple apps Right-click the desired apps.
51 of 66
16.8. Using the Search Function
Use the search function to find individual tasks, settings or apps quickly.
Move the mouse pointer into the top right or bottom corner of the display and
click Search.
Enter the name of the app or file and select an entry from the results list on the
left-hand side of the display.
The search results are arranged by
Apps, Settings and Files. Choose the category
(Apps, Settings or Files) in which the desired file is located.
17. Control Panel
The Control Panel allows you to customise the Start interface.
PLEASE NOTE!
Windows® 8 must be activated for changes to be made.
Move the mouse pointer into the top right or bottom corner of the display and
click
Settings.
Next, click Change PC settings.
Menu Instructions
Activate Windows Activate Windows
®
8 by telephone or over the Internet.
Customise Set the background image for the
lock screen and the Start screen here.
Select a profile image here.
User Create and update user accounts here.
Set or modify the PIN or image code.
Notifications Set the various program instructions to On or Off here.
Search Define the settings for the
search function here.
Define the app the search function should work with
here.
Sharing Define the settings for the share function here.
Define the apps to be shared here.
General Configure the general settings for time zone, spell
checking, language and memory here.
Reinstall the operating system without losing personal
user data or key basic settings.
Restore your Notebook to its factory settings.
Perform a reboot with a CD inserted.
Data protection Configure the security settings for apps, accounts and
Windows
®
8 here.
52 of 66
Devices Install additional external connected devices here, e.g.
joystick or USB speaker.
Enable or disable Download over metered
connections. This function prevents drivers for newly
added devices being searched for and downloaded via
the Internet.
Wireless Enable or disable flight mode here.
Enable or disable the integrated WLAN function here.
Simplified
operation
Customise the contrast, mouse pointer and tab bar to
your requirements here.
Synchronise
settings
Configure synchronisation of your Notebook with the
connected network.
Configure here whether or not an online
synchronisation should also be performed with payable
networks.
Home network
group
Here you will see the home network group and the apps
and files shared within it.
Windows Update Allow Windows
®
8 to search the Internet for any
necessary Windows
®
8 updates.
53 of 66
17.1. Windows
®
8 Power On/O Functions
The new Windows
®
8 allows you to restart your Notebook, put it into sleep mode or
shut it down.
Changes can be made to the sleep settings at any time in the power options.
In sleep mode the content of your Notebooks RAM is preserved while practically
all other components of your Notebook are disabled or their power consumption
reduced to a minimum. For example, if you flip the Notebook shut, it puts it into
sleep mode and it is automatically restarted upon opening.
Restarting Move the mouse pointer into the top right or bottom corner
of the display, move the mouse down and click Settings.
Now click Power and select Restart.
Your Notebook will now restart.
Sleep Move the mouse pointer into the top right or bottom corner
of the display, move the mouse down and click Settings.
Now click Power and select Sleep .
Your Notebook will now switch to sleep mode.
Shut down Move the mouse pointer into the top right or bottom corner
of the display, move the mouse down and click Settings.
Now click Power and select Shut down.
17.2. Control Panel Settings
You can change Windows
®
8 settings using the control panel. These settings control
virtually everything about how Windows
®
8 appears and functions and enable you
to customise Windows
®
8 to meet your requirements.
When the control panel is run for the first time, some of the most frequently used
control panel elements are displayed grouped together by category.
If you require additional information about a control panel element in the category
view, you must hold the mouse pointer over the icon or category name and read
the text shown there.
To run one of these elements, click on the associated icon or category name.
A list with executable tasks and a selection of individual control panel elements
opens for some of these elements.
To launch the control panel, proceed as follows:
Move the mouse pointer into the top right or bottom corner of the display and
click Search.
Enter Control Panel in the search field.
Click on Control Panel.
54 of 66
17.3. Resetting the Notebook to its Factory Settings
In the event of problems with the installation or other software problems which
make it necessary to reinstall the software, Windows
®
8 offers three options for
reinstalling Windows
®
8 on your Notebook. First ensure that you have backed up all
important data and programs.
17.3.1. Running System Restore
After restarting, press the F11 key or start up the Notebook with the F11 key
held down to launch PowerRecover or
Click the PowerRecover Windows
®
8 desktop app to run the program from the
Windows
®
8 desktop.
PLEASE NOTE !
The recovery function is only available in notebook mode.
You will be offered 3 possible options:
Burn Drivers and Tools to an Optical disc
Create a support disc
Refresh your PC without affecting your files
Update your Notebook without deleting your data.
Restore Choose between two recovery options:
Restore to HDD – no backup of user data
All data on the Notebook will be permanently deleted.
The factory settings will be restored.
Restore to HDD – with backed up user data
The factory settings will be restored and all user data under C:\USER will
be backed up.
PLEASE NOTE!
Always perform any type of recovery using mains power.
CAUTION!
The recovery process takes a long time when you select the
option to back up user data. Only the data located in the
folder C:\USER will be backed up. All other data will be deleted.
It is therefore important to perform regular data backups
to external data media. We do not accept any liability for
claims for compensation arising from the loss of data or any
consequential damages incurred.
Click Next and follow the on screen instructions to restore the factory settings.
55 of 66
17.4. UEFI rmware con guration
The UEFI firmware configuration (basic hardware configuration of your system)
provides you with a number of options for the configuration and operation of your
notebook. For example, you can modify the operating mode for interfaces, security
features or power supply management. The Notebook has already been configured
by the manufacturer to ensure optimum operation.
CAUTION!
Please only change settings where strictly necessary and if you
are familiar with the configuration options.
17.4.1. Executing the UEFI firmware configuration
You can only run the configuration program upon system startup. If the Notebook
has already started up, switch it off and restart it. Press the F2 key to run the UEFI
firmware configuration.
17.5. Windows
®
8 – Help and Support
Here you will find a comprehensive collection of instructions, help sections and
troubleshooting suggestions.
This help covers the entire spectrum of the Windows
®
operating system.
It is recommended for both beginners and experts. The information is subdivided
into topics and can be printed out or bookmarked. Start as follows:
Move the mouse pointer into the top right or bottom corner of the display,
move the mouse down and click
Settings.
Now click on Help.
Choose the topic you are interested in.
56 of 66
18. FAQ – Frequently Asked Questions
Where can I find the necessary drivers for my Notebook?
The drivers can be found on the integrated HDD in the base unit.
What is Windows
®
8 activation?
You will find a relevant section in these operating instructions containing
detailed information on this topic.
How do I activate Windows
®
8?
Windows
®
8 is activated automatically as soon as an Internet connection is
established.
How do I activate Windows
®
8 without an Internet connection?
Windows
®
8 can also be activated over the telephone. Follow the instructions
in the section “„Windows Activation“ to activate Windows
®
8 by telephone.
When is restoring factory settings recommended?
This method should only be selected as a last resort. Read about the
alternatives in the System recovery section.
How do I perform a data backup?
Perform a backup or backup synchronisation of selected data onto external
media to familiarise yourself with the technology. A backup is of no use if
you are unable to recover the data or if the medium is faulty or is no longer
available.
Why do I need to reinstall my USB device even though I have already done it?
If the device is not operated on the same USB port as the one it was installed
in, it automatically receives a new identifier. The operating system then treats
it like a new device and tries to reinstall it.
Use the installed driver or connect the device to the port on which it was
originally installed.
57 of 66
19. Customer Service
19.1. What To Do In Case of Hardware Problems
Malfunctions can sometimes have quite trivial causes, but they may also be the
result of defective components. We have included a brief troubleshooting guide
below which may help to solve any problems.
If these tips don’t do the trick, then we’ll be more than pleased to assist you. Just
give us a call!
19.2. Find The Cause
Start by carefully checking all the cable connections. If the indicator lamps are not
on, ensure that the Notebook and all peripheral devices are connected to the power
supply.
If you are in battery mode, connect the Notebook to the mains adapter and
check that the battery is charged.
If you wish to operate the Notebook using the mains adapter, disconnect the
mains adapter from the socket and connect an electrical appliance such as a
lamp to the same socket to test it. If the lamp does not work either, seek the
advice of an electrician.
Turn off the Notebook and check all cable connections. If the Notebook is
connected to peripheral devices, check all cable connections. Do not swap
around the cables for the various devices, even if they look alike. The pin
assignment within the cables may be different. Once you have ensured that the
devices power supply is functioning and all connections are intact, then switch
the Notebook back on.
58 of 66
19.2.1. Faults and Possible Causes
The screen is black.
This fault can have various causes:
The notebook is in standby mode
Solution:
Press the on/off switch.
The notebook is in energy-saving mode.
Solution:
Press the on/off switch.
The Notebook turns itself off during operation.
The batteries may be flat. Plug the Notebook in using the mains adapter and
charge the batteries.
No data can be read by the optical drive.
Check whether the disc has been inserted correctly.
No data can be read by the optical drive.
Check whether the disc has been inserted correctly.
The WLAN/Bluetooth connections do not work.
Check that flight mode is disabled.
The touchpad is not working.
To activate the touchpad, press the Fn + F9 keyboard shortcut.
Apps (e.g. the weather app) cannot be displayed as live tiles.
Check the date, time zone and time.
19.3. Do You Need More Help?
You’ve checked through the suggestions in the previous section and you’re still
having problems with your device? Then call our hotline or contact us at
www.medion.com. We’ll be glad to help you.
Before contacting your technology centre, however, prepare the following
information:
Have you made any upgrades or modifications to the initial configuration?
What peripheral devices do you use?
What messages, if any, appear?
What software were you using when the problem occurred?
What steps have you already taken to try and rectify the problem?
59 of 66
19.4. Driver Support
The system has been thoroughly and successfully tested with the installed drivers
in our test laboratory. It is normal in the computer sector, however, for the drivers
to need updating from time to time. This is because there may be compatibility
problems with other components (programs, devices) which have not yet been
tested. You can find current drivers on the Internet at the following address:
http://www.medion.com
Please use the service address for the country where the device was purchased.
19.5. Transport
Please note the following information if you wish to transport the Notebook:
Switch the Notebook off. This ensures that the hard drive heads are
automatically moved to a safe area to avoid damage.
After transporting the Notebook, wait until the appliance has reached
room temperature before switching it on. Large changes in temperature or
fluctuations in humidity can cause moisture build-up within the Notebook due
to condensation. This can cause an electrical short circuit.
Close the Notebook and check that the lid is firmly closed.
Always use a Notebook carrying case to protect the Notebook from dirt,
moisture, vibrations and scratches.
Always use the original cardboard packaging to ship your Notebook and obtain
advice on this from your carrier.
Always charge your batteries fully before embarking on longer trips and do not
forget to take along your mains adapter.
Find out about the power and communication options available in your
destination before travelling.
Where necessary, purchase the required power or communication adapter (LAN
etc.) before departure.
Over time, dust can collect inside the Notebook which then blocks the vents.
This can lead to an increase in the fan speed and, therefore, also increase
the operating volume of your Notebook. It can also lead to overheating and
malfunctions. Therefore, have the interior of the Notebook cleaned by your
service department or a specialist at regular intervals.
60 of 66
19.6. Maintenance
CAUTION!
None of the parts inside the Notebook housing require
cleaning or maintenance.
You can increase the lifespan of your Notebook with the following
measures:
Always unplug the device, disconnect all cables before cleaning.
Clean the Notebook with a damp, lint-free cloth.
Do not use solvents, corrosive or aerosol-based detergents to clean
the device.
Dust or grease on the touchpad can affect its sensitivity. Remove
the dust or grease from the surface of the touch pad with a strip of
adhesive tape.
Dust or grease on the touchpad will impair its sensitivity. Remove
the dust or grease from the surface of the touch pad with a strip of
adhesive tape.
19.7. Upgrading/Modifying and Repair
Upgrades and modifications to your Notebook should only be
carried out by qualified specialists. If you do not have the necessary
qualifications, have the work carried out by a qualified service
technician. Please contact your customer service department if you
have technical problems with your Notebook.
If a repair must be carried out, please contact only our authorised
service partners.
61 of 66
19.8. Notes for Service Technicians
Only service technicians may open up the Notebook housing or
upgrade or modify your Notebook.
Use only original replacement parts.
Before opening the housing, disconnect all power and connecting
cables. If the Notebook is not disconnected from the power supply
before being opened, there is a risk that components could be
damaged.
Internal components of the Notebook may be damaged by
electrostatic discharge (ESD). Carry out repairs, as well as system
enhancements or modifications, at an ESD workplace. If such a
workplace is not available, wear an antistatic cuff or ensure you are
touching an earthed, metallic object. We will charge for any repairs
to damage caused by incorrect handling.
20. Recycling and Disposal
Should you have any questions concerning the disposal please contact your dealer
or customer service.
Packaging
Your device has been packaged to protect it against transportation
damage. Packaging is raw material and can be re-used or added to the
recycling system.
Device
The device is fitted with two integrated batteries. At the end of
its operating life, do not dispose of the device with your ordinary
household rubbish. Consult your local authority to find out about
collection centres for environmentally sound disposal of electrical and
electronic scrap.
62 of 66
21. European EN 9241-307 Class II Standard
For active matrix LCDs (TFT) with a resolution of 1920 x 1080 pixels, each of which
consist of three sub-pixels (red, green, blue), there are a total of approx. 6.2 million
control transistors in use. Due to this very high number of transistors and the
associated extremely complex manufacturing processes used, occasionally one or
more pixels can fail or become incorrectly controlled.
In the past, there were a number of approaches for defining the permitted number
of pixel defects. However, these approaches were mostly very complicated and
varied from one manufacturer to the next. When handling warranty issues for all
of its display products, MEDION therefore adheres to the strict and transparent
requirements of the standard ISO 9241-307, Class II; which has been briefly
summarised below.
The EN 9241-307 standard defines, amongst other things, the generally applicable
guidelines relating to pixel defects. Pixel defects are categorised into four fault
classes and three defect types. Every individual pixel consists of three sub-pixels,
each of which is assigned a basic colour (red, green, blue).
Pixel structure
5 Pixel
Rows
Sub-Pixel
Pixel
blue
green
red
5 Pixel
63 of 66
Pixel defect types:
• Type 1:
permanently illuminated pixel (bright, white dot) even when not activated. A
white pixel occurs due to the illumination of all three sub-pixels.
• Type 2:
non-illuminated pixel (dark, black dot) even when activated.
• Type 3:
abnormal or faulty red, green or blue sub-pixel (e.g. permanently illuminated at
half brightness, one colour not illuminated, flashing or flickering but not type 1
or 2)
Supplement: Type 3 cluster (= failure of two or more sub-pixels within a 5 x 5 pixel
block). A cluster is a field of 5 x 5 pixels (15 x 5 sub-pixels).
EN 9241-307, error class II
Resolution Type 1 Type 2 Type 3
Cluster
Type 1, type 2
Cluster
Type 3
1024 x 768 2 2 4 0 2
1280 x 800 3 3 6 0 3
1280 x 854 3 3 6 0 3
1280 x 1024 3 3 7 0 3
1366 x 768 3 3 7 0 3
1400 x 1050 3 3 8 0 3
1600 x 900 3 3 8 0 3
1920 x 1080 4 4 9 0 3
64 of 66
22. Legal notice
Copyright © 2013
All rights reserved.
This operating manual is protected by copyright.
Mechanical, electronic and any other form of reproduction is
prohibited without the written permission of the manufacturer
Copyright is owned by the company:
Medion AG
Am Zehnthof 77
45307 Essen
Germany
Subject to technical and optical changes as well as printing errors.
The operating manual can be reordered via the service hotline and is available for
download via the service portal at
www.medion.com/gb/service/start/.
You can also scan the QR code above and download the operating manual onto
your mobile device via the service portal.
65 of 66
23. Index
B
Battery Mode ..............................................23
Battery Charge Status .........................23
Battery Performance ...........................24
Charging the Batteries ........................23
Charging the Battery ...........................23
Checking the Battery Charge ...........24
Discharging the Battery .....................24
Inserting the Battery ...........................23
Bluetooth ......................................................38
C
Cabling .......................................................... 12
Card Reader .................................................39
Connecting .................................................. 11
Connecting an External Monitor .........30
Connexions audio externes ...................36
Control Panel........................................51, 53
Customise ................................................51
Data protection .....................................51
Devices .....................................................52
General ..................................................... 51
Home network group .........................52
Notifications ...........................................51
Search .......................................................51
Sharing .....................................................51
SimplifiedOperation ............................ 52
Synchronise settings ...........................52
User ............................................................51
WindowsActivate ..................................51
Windows Update ..................................52
Wireless .................................................... 52
Customer Service ...................................... 57
D
Data Backup ...................................................9
Data Input ....................................................31
Declaration of Conformity ........................6
Display
Appearance and Customisation ......29
Connecting an External Monitor.....30
Opening and Closing ..........................26
Screen Resolution .................................28
Touch screen ..........................................26
Driver Support ............................................59
E
Environmental Requirements ...............10
Ergonomics ..................................................10
European Standard ...................................62
External Audio Connections ..................36
F
Factory Settings .........................................54
FAQ .................................................................56
Faults and Possible Causes .....................58
H
Hard Drives ..................................................35
Help and Support ......................................55
Home Group ................................................44
I
Improved Desktop ....................................43
Improved Device Management ...........44
J
Jump Lists ....................................................43
K
Keyboard ......................................................32
L
Logging in to Windows ...........................45
Setting a PIN for Windows .................45
Setting Up an Image Code for
Windows .............................................45
Setting Up a Password for
Windows .............................................45
M
Mains Power ................................................21
Maintenance ...............................................60
N
Network ........................................................37
O
On/Off Switch .............................................21
Operating Safety ...........................................7
P
Power Management .................................25
Power Supply .......................................11, 21
Mains Power ...........................................21
66 of 66
On/Off Switch ........................................21
Proper Use .......................................................6
R
Recycling and Disposal ...........................61
Restarting ..................................................... 53
S
Safety Instructions
Batteries ...................................................14
Cabling .....................................................12
Care of the Display ...............................60
Connecting .............................................11
Data Backup ..............................................9
Display ...................................................... 15
Environmental Requirements .......... 10
Ergonomics ............................................. 10
Maintenance ..........................................60
Operational Safety ..................................7
Power Supply .........................................11
Setup Location .........................................9
Touchpad .................................................13
Transport ................................................. 59
Saving Energy .............................................53
Screen Resolution .....................................28
Securing Your Notebook .........................40
Sleep ..............................................................53
Sleep Mode ..................................................25
Soft ware ........................................................41
Getting to know Windows® 8 ...........41
Windows® 8 – What’s New .................42
Windows activation .............................41
Sound System .............................................36
Starting ......................................................... 22
T
Taskbar ..........................................................42
Touchpad......................................................33
Touch screen ...............................................26
U
Universal Serial Bus Port .........................40
Upgrades/Modifications
Notes for service technicians ...........61
Use
Use in notebook mode .......................19
Use in tablet mode ...............................19
V
Views
Bottom View of the Tablet Unit .......18
Left Side ...................................................17
Open Notebook ....................................16
Right Side ................................................18
W
Windows® 8 Desktop ................................47
Desktop apps .........................................48
Windows® 8 Start Screen ........................46
Windows® 8 app ....................................47
Wireless LAN ................................................37
Flight Mode ............................................38
Requirements .........................................37
Working With Apps ...................................49
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medion AKOYA P2211T - MD98606 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medion AKOYA P2211T - MD98606 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info