467282
29
Zoom out
Zoom in
Previous page
1/40
Next page
Turning the Metronome ON/OFF
Tuning
Selecting the Beat
Setting the Transpose
Press the [Metronome] button to turn the metronome on.
Press the [Metronome] button again to turn the metronome
off.
1.
2.
Press the [FUNCTION] button.
Select “TUNE”.
Use [FUNCTION], [BACK] or [NEXT] button to select TUNE.
The LCD displays the tune value. The value ranges from -50
to 50 and the default value is 0.
The function sets the overall pitch of the instrument.
Change the tune value.
Use the data dial, [+/YES] or [-/NO] button to change the
tune value.
Press [+/YES] and [-/NO] simultaneously to set the default
tune value.
1.
2.
3.
Press the [FUNCTION] button.
Select “BEAT”.
Use [FUNCTION], [BACK] or [NEXT] button to select BEAT.
The LCD displays the beat value. The value ranges from 2-9
and 0. The default value is 4.
Change the beat value.
Use the data dial, [+/YES] or [-/NO] button to change the
beat value.
Press [+/YES] and [-/NO] simultaneously to set the default
beat value.
1.
2.
3.
Press the [FUNCTION] button.
Select “XPOSE”.
Use [FUNCTION], [BACK] or [NEXT] button to select
XPOSE. The LCD displays the transpose value. The value
ranges from -12 to 12 and the default value is 0.
This function allows the overall pitch of the instrument to be
transposed up or down by a maximum of one octave in
semitone increments.
Change the transpose value.
Use the data dial, [+/YES] or [-/NO] button to change the
transpose value.
Press [+/YES] and [-/NO] simultaneously to set the default
transpose value.
1.
2.
3.
GrandPn1
Tune
METRONOME
FUNCTION
Xpose
FUNCTION
Beat
FUNCTION
29
BACK NEXT
BACK NEXT
BACK NEXT
Metronoom aan/uitschakelen
Stemming
Maatsoort instellen
Transponeerinstellingen
Andere functies
1. Druk op de METRONOME-toets om de metronoom aan te zetten.
2. Druk nogmaals op de METRONOME-knop om de metronoom uit te
zetten.
1. Druk op de FUNCTION-toets.
2. Kies “TUNE”.
Gebruik de toetsen FUNCTION, BACK en NEXT om TUNE te kiezen. Het LCD-
venster toont de huidige instelling. Deze waarde heeft een bereik van -50 tot 50
en de standaardwaarde is 0. Deze functie beïnvloedt de stemming van het
complete instrument.
3. Verander de stemming.
Gebruik het datawiel of de toetsen +/YES en -/NO om de stemming aan te
passen.
Gelijktijdig indrukken van de toetsen +/YES en -/NO resulteert in het terugzetten
van de standaardwaarde.
1. Druk op de FUNCTION-toets.
2. Kies “BEAT”.
Gebruik de toetsen FUNCTION, BACK en NEXT om BEAT te kiezen. Het LCD-
venster toont de huidige instelling. Deze waarde heeft een bereik van 2-9 en 0. De
standaardwaarde is 4.
3. Verander de maatsoort.
Gebruik het datawiel of de toetsen +/YES en -/NO om de maatsoort aan te
passen.
Gelijktijdig indrukken van de toetsen +/YES en -/NO resulteert in het terugzetten
van de standaardwaarde van de maatsoort.
1. Druk op de FUNCTION-toets.
2. Kies “XPOSE”.
Gebruik de toetsen FUNCTION, BACK en NEXT om XPOSE te kiezen. Het
LCD-venster toont de huidige instelling. Deze waarde heeft een bereik van -12
tot 12 en de standaardwaarde is 0.
3. Verander de transponeerinstelling.
Gebruik het datawiel of de toetsen +/YES en -/NO om de transpositie aan te
passen.
Gelijktijdig indrukken van de toetsen +/YES en -/NO resulteert in het terugzetten
van de standaardwaarde van de transpositie.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medeli MD200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medeli MD200 in the language / languages: Dutch as an attachment in your email.

The manual is 8,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info